MK8 GTI Dyno Mode
During the process of trying to dyno our stock MK8 GTI we found the simple steps required to put a MK8 GTI onto a Dyno.
These are the steps we took to resolve the fault on the dash to "Engine speed max. 3800 rpm".
- Turn on the ignition
- Turn on the Hazard Lights
- Pump the Accelerator Pedal 5 times
- Start vehicle (once deactivation notifications come up in instrument cluster)
*NOTE - If you do not start the car quickly after the deactivation notices, we have found the dyno mode will toggle back off. If this happens you should repeat the process.
- MK8 VW GTI Parts
- Stock MK8 GTI Dyno - VIDEO
1 - Turn on the Ignition
2 - Turn on the Hazard Lights
3 - Pump the Accelerator Pedal 5 times
4 - Start Vehicle
2021-12-28 | By: Paul Barrett
Paul, would like to hear if you did a dyno run on your new GTI with the JB4 tune. How do you like it?
You should offer the factory rear fog light assembly for the mk8 GTI. Some Club Sport parts would also be nice.
Best regards, Jim