Upgrade Kit - Turns Analog Gauge Into V3 Gauge

The V3 upgrade adds even more user control and vehicle monitoring options. Read DTCs on command, remove pids that you don't care to see, configure unit settings of individual measurements, calibrate your vehicle speed, and read AFR in Lambda. 

P3 V3 Gauge Features

• Plug and Play Install - plugs directly into your OBD2 port 
• Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
• Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)

• Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
• Coolant temperature
• Air/Fuel ratio (can be read in AFR or Lambda)
• Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
• Intake air temperature
• Throttle angle
• Ignition timing
• Engine RPM
• Exhaust gas temperature
• Battery voltage
• Programmable shift light
• Analog input 1 (brown wire) can allow the gauge to read any 0-5 volt linear output sensor
• Analog input 2 (blue wire) can allow the gauge to read any 0-5 volt linear output sensor
• Acceleration timers (0-60mph/0-100mph/60-130mph)
• Braking timers (60-0mph/100-0mph)