Brake Pressure Bleeder Kit with VW & Audi Adapter

Bleeding brakes the traditional way can be messy, time-consuming, and often requires a second person. This pressure brake bleeder makes the process faster, cleaner, and easier by allowing you to bleed your brake system solo.

Designed for VW and Audi vehicles, this tool pressurizes the brake fluid reservoir to push fluid through the system, helping remove air bubbles quickly and consistently for a firm, reliable pedal.

Why You’ll Want It:

• One-Person Operation: No need for a helper
• Consistent Pressure: Ensures thorough, even bleeding
• Cleaner Process: Reduces spills and mess
• Faster Brake Service: Saves time compared to manual bleeding
• VW/Audi Compatible: Designed for European brake fluid reservoirs

How to Use

• Fill the bleeder with fresh brake fluid and attach it to the reservoir
• Pressurize the system to 15–20 PSI (do not exceed ~25 PSI)
• Start bleeding at the wheel farthest from the master cylinder and work closer
• Open each bleeder screw until clean, bubble-free fluid flows, then close
• Monitor fluid level to prevent introducing air into the system

Note: Some VW and Audi models may require a scan tool such as OBDeleven or VCDS (VAG-COM) to cycle the ABS pump during a full system bleed. This is typically only needed if air has entered the ABS module.