IE's performance ECU calibration for your 2018-2020 Audi Q5 2.0L Turbo engine completely transforms your mild-mannered SUV into a sporty and performance-tuned crossover with up to 97 horsepower and 176ft-lbs of torque over stock! Enjoy power and fun within minutes, all from your phone!
Shop By Vehicle
You're viewing parts for , but your selected vehicle is a .
Integrated Engineering
IE Performance Stage 2 ECU Tune for Audi B9 2.0T Q5 (80A)
PART#: IESOVN72
$649.00
Ships in 1 Business Day from our Facility "Ships in" reflects an estimated lead time before this item will leave via the shipping method selected. Please Note: Selecting an expedited shipping method during the checkout process will not change the "Ships in" time frame.
APPLE & ANDROID
MOBILE APP
BLUETOOTH TUNING
UP TO
359HP & 445TQ
POWER YOU CAN FEEL
INCLUDES
FUEL OPTIMIZED
91, 93 104, E40, & E85
-
ENGINE TUNES
-
TRANSMISSION TUNE
-
PERFORMANCE
-
INSTALL & SUPPORT
LEADING FEATURES
- Horsepower & torque gains maximized
- Includes Apple or Android mobile flashing app
- Increased acceleration and reduced throttle lag
- Stage 1 for stock hardware or intake & intercooler upgrades
- Stage 2 for intake, intercooler, and exhaust upgrades
- 91, 93, & 104 octane high-performance maps (95, 98, & 108 RON)
- Boost control optimized for all conditions
- Easy octane switching takes only minutes
- Road speed limiters removed
- Engineered for all climates and elevations
- Direct port OBDII at-home flashing
- Read and clear diagnostic/problem codes
- Easy to use Data-logger
ECU STAGES
HIGH-PERFORMANCE ENGINE SOFTWARE
Q5 2.0T STAGE 1
IE Stage 1 ECU Tunes for your Audi 2.0T Q5 significantly increase performance with more horsepower, torque, and faster acceleration with octane-specific map options for 91 and 93 octanes. Enjoy up to 314 horsepower and 396ft-lbs. Engineered to operate on stock hardware or compatible with intake, intercooler, and catback exhaust upgrades.
See the performance tab for power results and dyno charts.
Q5 2.0T STAGE 2
IE Stage 2 ECU tune is the next step of power and delivers the most performance potential available from your stock engine and turbocharger from an upgraded performance downpipe. Maximum torque and horsepower gains are realized across the powerband with 337-359HP and 410-445ft-lbs with options for 91, 93, or 104 octane fuel. See below for a complete list of stage 2 requirements.
Upgrading from Stage 1 to Stage 2 or beyond is easy! With IE, you only pay the difference in tune cost with no extra fees. When you install the required matching hardware, follow the instructions on your IE POWERlink app to purchase the tune upgrade, and you will be blowing away the competition in minutes!
HARDWARE GUIDE
While no hardware upgrades are required for Stage 1, upgrading the intake and intercooler will provide increased airflow, lower intake air temps, and quicker heat soak recovery for an overall more efficient and faster vehicle.
| PART UPGRADE | STAGE 1 | STAGE 2 |
|
AIR INTAKE |
OPTIONAL |
RECOMMENDED |
|
INTERCOOLER |
OPTIONAL |
HIGHLY RECOMMENDED |
|
CATBACK EXHAUST |
OPTIONAL |
OPTIONAL |
|
DOWNPIPE |
NOT COMPATIBLE |
REQUIRED |
TECHNICAL FEATURES
Our tuning masters not only deliver more engine power but also include extensive adjustments and features to make every bit of your driving experience more refined and enjoyable.
COMPLETE TRANSFORMATION
Your Q5 will do more than pull harder and drive faster; you will feel more connected and in control of your newly refined and enthusiast-programmed Audi. IE calibration engineers use advanced equipment to completely rewrite the entire engine management programming to improve all drive mapping sections significantly. Enjoy reduced throttle lag, linear power delivery, removed top speed limiters, smoother throttle control, and more.
FITMENT GUIDE
| MAKE | MODEL | YEAR | ENGINE |
|
Audi |
Q5 |
2018-2020 B9 (80A) |
2.0T Gen 3 (MLB) |
Important note: Engine ECU tuning is compatible with 2017-2020 model years only, and is incompatible with the new 2021+ ECU variations. Transmission TCU tunes are compatible with DL382 DSG "Gen 1" transmissions only up to most 2020 model years. In some rare cases, 2019 and 2020 model year vehicles may be equipped with unsupported Gen 2 TCU variations.
ABOUT THE BRAND
Shop All Integrated Engineering Parts
Integrated Engineering
Vehicle Compatibility
1 application
| Make | Model | Generation | Years | Engine | Transmission | Drivetrain |
|---|---|---|---|---|---|---|
| Audi | Q5 | B9 (2018-2024) | 2018–2024 | 2.0T | DSG (7 Speed) | AWD |
RELATED PRODUCTS
Recommended additions for your setup.
YOU MAY ALSO LIKE
Other great parts based on your browsing
