Shop By Vehicle
You're viewing parts for , but your selected vehicle is a .

Assembled by DAP
Audi A3 8V Water Pump Kit
PART#: A3-8V-WATER-PUMP-KIT
"Ships in" reflects an estimated lead time before this item will leave via the shipping method selected. Please Note: Selecting an expedited shipping method during the checkout process will not change the "Ships in" time frame.
Audi A3 8V 2015-2020 Water Pump Kit – Everything you need for the job!
Have leaks or low coolant warnings on your Audi A3 8V 2015-2020? That likely means it’s time to replace your water pump and thermostat assembly. This Audi A3 8V 2015-2020 Water Pump Kit was put together to ensure you have all the parts you need to fix this common problem.
Most often the water pump on a Audi A3 8V 2015-2020 will start with a slow leak, which occasionally leaves you with a low coolant level. Over time coolant leaks tend to get worse, and if left long enough they and eventually blow out all your coolant leaving you stranded.
Make sure to address your coolant leak before if becomes a real headache.
What’s Included in the Audi A3 8V 2015-2020 Water Pump Kit?
- Thermostat with Housing (INA) – Electromechanical Thermostat
- Water Pump with Gasket (INA) – Pre Installed in Tstat housing
- Water Pump Belt (INA) – Drives the water pump, driven by the balance shaft
- Reverse Thread Gear Bolt (INA) – One time use, requires removal to swap belt
- Union Pipe w seals (Genuine VW/Audi) – Connects the thermostat housing to the oil cooler
- 1 Gallon of Concentrated Coolant (Genuine VW/Audi) –Mix 50/50 w/ water
- Intake Manifold Gasket (Genuine VW/Audi) –Most users remove the intake to access the water pump
Common Symptoms of a Failing Audi A3 8V 2015-2020 Water Pump or Thermostat Assembly
- Coolant Leaks: Small puddles under the engine towards the front of the engine bay area.
- Low Coolant Warnings: Lights on dash caused by low coolant levels.
- Overheating: Rare, but possible if coolant levels drop significantly.
- Engine Fault Code: P00B7: Low coolant flow/performance - uncommon
Our kit addresses all these issues, ensuring your cooling system is restored to factory performance.
Tools for Installing a Water Pump
Sockets - 7mm, 10mm, 13mm, 24mm, 32mm
Torx Bits - T25, T30
Wrenches - 13mm, 17mm(Stubby), 21mm
Flat Head Screw Driver
Extensions
Why Choose Our Audi A3 8V 2015-2020 Water Pump Kit?
- Specifically designed for Audi A3 8V 2015-2020 2.0T engines.
- Genuine VW/Audi and INA components ensure quality and long lasting reliability
- Includes everything you need for a complete repair—no extra parts required!
Fitment:
- Audi A3 8V 2015-2020 (2015–2021) with 2.0T engines.
- For questions about fitment, contact us via email with your VIN.
Avoid Coolant Leaks and Overheating
Don’t let a failing water pump or thermostat compromise your Audi A3 8V 2015-2020. Order your Audi A3 8V 2015-2020 Water Pump Kit today and enjoy peace of mind that your small coolant leak doesn’t turn into a BIG coolant leak.
How to Install a Audi A3 8V 2015-2020 Water Pump/Thermostat Housing
Replace your leaking or failed Audi A3 8V Water Pump

Assembled by DAP
Vehicle Compatibility
6 applications
| Make | Model | Generation | Years | Engine | Transmission | Drivetrain |
|---|---|---|---|---|---|---|
| Audi | A3 | 8V (2014-2021) | 2014–2021 | 1.8T GEN3 | DSG (6 Speed) | AWD |
| Audi | A3 | 8V (2014-2021) | 2014–2021 | 1.8T GEN3 | DSG (6 Speed) | FWD |
| Audi | A3 | 8V (2014-2021) | 2014–2021 | 2.0T GEN3 | DSG (6 Speed) | AWD |
| Audi | A3 | 8V (2014-2021) | 2014–2021 | 2.0T GEN3 | DSG (6 Speed) | FWD |
| Audi | A3 | 8V (2014-2021) | 2014–2021 | 2.0T GEN3 | DSG (7 Speed) | AWD |
| Audi | A3 | 8V (2014-2021) | 2014–2021 | 2.0T GEN3 | DSG (7 Speed) | FWD |
RELATED PRODUCTS
Recommended additions for your setup.
YOU MAY ALSO LIKE
Other great parts based on your browsing
