RSe102 - 20x9.0 +40mm 5:112 66.5CB (GUN METALLIC - SATIN)

Introducing the all new RSe102 light weight wheels, a modern rendition of our classic and original full forged RS10 (below).

The RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design. 

Each RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers or adapters!

The same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces ultra light weight wheel similar to full forged wheels but fraction of the cost. 

Weighing just a mere 21.7 lbs, The RSe102 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.

• Size: 20x9.0
• Offset (E.T.): +40mm
• PCD (Bolt Pattern): 5-112
• Center Bore: 66.5mm / 57.1mm (with hub ring)
• Weight: 21.7 lbs.

Recommended Tire Size:

• Audi A4 (B8): 255 or 265/30R20 (agressive fitment)
• Audi A6 (C7): 255 or 265/35R20 (agressive fitment)
• VW Passat CC: 245/30R20
• VW Passat B7: 245/35R20
• VW Tiguan: 255/35R20

Notes:

Will not fit Audi TTRS 8S - 5mm spacer is required.

RSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.

Neuspeed RSe Wheels require the use of factory lug bolts. Please consult with our tech should you have aftermarket ones to confirm compatibility with our wheels.

Wheel center cap from late model VWs and Audi vehicles will not seat properly due to change in VW/Audi tooling. We recommend purchasing the following items from dealer if you prefer using factory emblem with Neuspeed RSe wheels.

Compatible with Brembo, Stoptech and many other BBKs without wheel spacers/adapters.

NEUSPEED recommends Michelin Tires (not included).

RSE102 20X9.0 +40 5-112 (66.5) SATIN GRAPHITE