BFI MK7 Torque Arm Insert - Stage 1 - Version 2 - Post 9/15 vehicles - (Replaced by EBFI78-Q7-021)

BFI MK7 Torque Arm Insert - Stage 1 - Version 2 - Post 9/15 vehicles - (Replaced by EBFI78-Q7-021)

BFI MK7 Torque Arm Insert - Stage 1 - Version 2 - Post 9/15 vehicles - (Replaced by EBFI78-Q7-021)

Share
SKU:
EBFI783M7915DG

Ships In: Discontinued ? "Ships in" reflects an estimated lead time before this item will leave via the shipping method selected.Please Note: Selecting an expedited shipping method during the checkout process will not change the "Ships in" time frame.

$37.99

BFI MK7 Torque Arm Insert - Stage 1 - Version 2 - Post 9/15 vehicles - EBFI783M7915DG

  • FREE Worldwide Shipping

    Fast & free shipping

    On all orders over $99.00

  • Money Back Gurantee

    Money Back Gurantee

    7 days money back gutarantee

  • SUPPORT 24/7

    Support 24/7

    We support 24/24h on day

  • Safe shopping guarantee

    Secure Payment

    Safe shopping guarantee

Our Stage 1 Torque Arm Insert is aimed at maximizing daily comfort while still offering optimized performance gains over stock. These are the only MQB inserts available that feature a specifically engineered dimension that limits unwanted vibration, offering the best compromise available. We recommend the Stage 1 insert to majority of our customers.

Under hard acceleration, the pendulum mount (commonly referred to as the "dogbone" or by VW as the "torque arm") acts to limit rotational movement of the engine. The factory bushings do a satisfactory job, while limiting vibrations, but only during sedate driving conditions. When pushed hard, those bushings flex creating a vague feeling in the engine and gearbox and adding to the dreaded wheel hop phenomenon.

Our pendulum mount torque arm insert fills the voids in the stock rubber bushing, making what was a soft rubber bushing with voids into what behaves like a solid mount. With the insert installed, you will notice that throttle response will feel better and your shifts will feel more crisp and defined, especially on manual transmission cars.

INCLUDES:

  • Torque arm / dogbone polyurethane insert

  • Laser cut washer

  • Steel spacer

  • High strength grade 10.9 replacement bolt

FITS:

  • All MQB Platform Vehicles Including MK7 GOLF/GTI & 8V Audi A3/S3 Post 9 /15 Build

SPECIAL NOTE:

  • You may experience some in-cabin vibrations after installing our insert. These vibrations are most noticeable in reverse and while the a/c is engaged at idle. These are normal and will subdue after approximately 1,000 miles of driving. TDI models will experiencing increased NVH compared to gasoline vehicles due to the design of the diesel engine.

This product fits the following models
Vehicle Application Data
Brand Model Year Engine Transmission Drivetrain
Audi A3 8V (2014-2021) 2.0T GEN3 DSG (6 Speed) AWD
Audi A3 8V (2014-2021) 2.0T GEN3 DSG (6 Speed) FWD
Audi S3 8V (2015-2021) 2.0T GEN3 DSG (6 Speed) AWD
Audi S3 8V (2015-2021) 2.0T GEN3 DSG (7 Speed) AWD
Audi TT-S MK3 (2016-2023) 2.0T GEN3 DSG (6 Speed) AWD
Audi TT-S MK3 (2016-2023) 2.0T GEN3 DSG (7 Speed) AWD
Volkswagen Jetta MK7 (2019-2022) GLI 2.0T GEN3 DSG (7 Speed) FWD
Volkswagen Jetta MK7 (2019-2022) GLI 2.0T GEN3 Manual (6 Speed) FWD
Write Your Own Review
You're reviewing:BFI MK7 Torque Arm Insert - Stage 1 - Version 2 - Post 9/15 vehicles - (Replaced by EBFI78-Q7-021)

No Related Posts

Loading...
Scroll To Top