PCV Delete Plate for 2.0t FSI

PCV Delete Plate for 2.0t FSI

PCV Delete Plate for 2.0t FSI

Share
SKU:
FMPCVD1

Ships In: Ships Directly from Supplier ? "Ships in" reflects an estimated lead time before this item will leave via the shipping method selected.Please Note: Selecting an expedited shipping method during the checkout process will not change the "Ships in" time frame.

$128.40

PCV Delete Plate for 2.0t FSI

  • FREE Worldwide Shipping

    Fast & free shipping

    On all orders over $99.00

  • Money Back Gurantee

    Money Back Gurantee

    7 days money back gutarantee

  • SUPPORT 24/7

    Support 24/7

    We support 24/24h on day

  • Safe shopping guarantee

    Secure Payment

    Safe shopping guarantee

FSI PCV delete kit

The stock PCV on the TFSI engine is quite fragile and over time, or when running lots of boost, the diaphragm inside can rip which can result in excessive blowby entering the inlet manifold at idle (smoking from the tailpipe) or a loss of boost when driving, which can cause other problems.

Traditionally we fit a catch can to remove the PCV entirely and catch the oil vapours from the engine

http://www.forgemotorsport.co.uk/Oil_Catch_Tank_System_for_20_Litre_FSi_Vehicles_with_a_Charcoal_Filter_Installed--product--7.html

http://www.forgemotorsport.co.uk/Oil_Catch_Tank_System_for_20_Litre_FSi_Vehicles_Without_Charcoal_Filter--product--6.html

but if you want a cheaper and more simple solution you can delete the PCV and divert the breathing to the rear cam cover outlet only, by using our Forge Motorsport PCV Delete kit.

Simply put it removes the PCV and links the two internal ports together which emulates what happens inside the stock PCV when the engine is on boost, but without any fragile components to break or split. Nothing detrimental happens to the engine by doing this, but it completely isolates the inlet manifold from the cam cover.

The kit also blanks off the port on the end of the inlet manifold that used to go to the PCV, and replaces it with our FMBGFK2 boost gauge fitting kit. This comes complete with 3 vacuum hose takeoffs and blanking screws so you can run a boost gauge, water spray controller etc. or you can blank them all off, it’s up to you.

The kit comes complete will all parts necessary for installation and a full set of instructions

This product fits the following models
Vehicle Application Data
Brand Model Year Engine Transmission Drivetrain
Audi A3 8P (2006-2008) 2.0T FSI DSG (6 Speed) FWD
Audi A3 8P (2006-2008) 2.0T FSI Manual (6 Speed) FWD
Audi TT MK2 (2007-2013) 2.0T FSI DSG (6 Speed) FWD
Audi TT-S MK2 (2007-2015) 2.0T FSI DSG (6 Speed) AWD
Volkswagen GTI MK5 (2006-2009) 2.0T FSI DSG (6 Speed) FWD
Volkswagen GTI MK5 (2006-2009) 2.0T FSI Manual (6 Speed) FWD
Volkswagen Golf R / R32 MK6 (2012-2013) Golf R 2.0T FSI Manual (6 Speed) AWD
Volkswagen Jetta MK5 (2006-2009) 2.0T FSI DSG (6 Speed) FWD
Volkswagen Jetta MK5 (2006-2009) 2.0T FSI Manual (6 Speed) FWD
Volkswagen Passat B6 (2006-2010) 2.0T FSI Automatic FWD
Volkswagen Passat B6 (2006-2010) 2.0T FSI Manual (6 Speed) FWD
Volkswagen Passat B6 (2006-2010) 2.0T TSI Automatic FWD
Volkswagen Passat B6 (2006-2010) 2.0T TSI Manual (6 Speed) FWD
Write Your Own Review
You're reviewing:PCV Delete Plate for 2.0t FSI

No Related Posts

Loading...
Scroll To Top