Rear Rotor (2 Piece) Girodisc (330x20mm)

Rear Rotor (2 Piece) Girodisc (330x20mm)

Rear Rotor (2 Piece) Girodisc (330x20mm)

Share
SKU:
A2-130

Ships In: Ships Directly from Supplier ? "Ships in" reflects an estimated lead time before this item will leave via the shipping method selected.Please Note: Selecting an expedited shipping method during the checkout process will not change the "Ships in" time frame.

$950.00

Rear Rotor (2 Piece) Girodisc (330x20mm)

  • FREE Worldwide Shipping

    Fast & free shipping

    On all orders over $99.00

  • Money Back Gurantee

    Money Back Gurantee

    7 days money back gutarantee

  • SUPPORT 24/7

    Support 24/7

    We support 24/24h on day

  • Safe shopping guarantee

    Secure Payment

    Safe shopping guarantee

The Girodisc system is a direct replacement for the OE disc, no modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc front rotors are approx 13.9lbs vs. 17.1lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc. The rotor and hat have a floating mount system, which utilizes 8 or 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by grade 12 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads. Once the Girodisc system is in place, simply replace the cast iron rotor when needed. Sold/priced per pair.

This product fits the following models
Vehicle Application Data
Brand Model Year Engine Transmission Drivetrain
Audi A6 C7 (2012-2015) 2.0T Auto (8 Speed) AWD
Audi A6 C7 (2012-2015) 3.0 TDI Auto (8 Speed) AWD
Audi A6 C7 (2012-2015) 3.0T V6 Auto (8 Speed) AWD
Audi A6 C7.5 (2016-2018) 2.0T Auto (8 Speed) AWD
Audi A6 C7.5 (2016-2018) 3.0 TDI Auto (8 Speed) AWD
Audi A6 C7.5 (2016-2018) 3.0T V6 Auto (8 Speed) AWD
Audi A7 C7 (2011-2018) 3.0T V6 Auto (8 Speed) AWD
Audi Q5 B8 (2009-2017) 3.0 TDI Auto (8 Speed) AWD
Audi Q5 B8 (2009-2017) 3.0T V6 Auto (8 Speed) AWD
Audi S4 B8 (2008-2012) 3.0T V6 DSG (7 Speed) AWD
Audi S4 B8 (2008-2012) 3.0T V6 Manual (6 Speed) AWD
Audi S4 B8.5 (2013-2016) 3.0T V6 DSG (7 Speed) AWD
Audi S4 B8.5 (2013-2016) 3.0T V6 Manual (6 Speed) AWD
Audi S5 B8 (2008-2012) 3.0T V6 DSG (7 Speed) AWD
Audi S5 B8 (2008-2012) 3.0T V6 Manual (6 Speed) AWD
Audi S5 B8.5 (2013-2016) 3.0T V6 DSG (7 Speed) AWD
Audi SQ5 B8 (2014-2017) 3.0T V6 Auto (8 Speed) AWD
Audi SQ5 B9 (2018-Current) 3.0T V6 Auto (8 Speed) AWD
Audi TT-RS 8J (2012-2013) 2.5T Manual (6 Speed) AWD
Write Your Own Review
You're reviewing:Rear Rotor (2 Piece) Girodisc (330x20mm)

No Related Posts

Loading...
Scroll To Top