Chemical Guys DIRTTRAP - Cyclone Dirt Trap Car Wash Bucket Insert RED

Special Price $9.99 was $14.99

Chemical Guys DIRTTRAP - Cyclone Dirt Trap Car Wash Bucket Insert RED

Manufacturer: Chemical Guys

Ships In: 1-3 Business Days From our Facility

We accept:

Credit Card

 <iframe width="100%" height="600" src="" frameborder="0" gesture="media" allow="encrypted-media" allowfullscreen></iframe>

Why Buy This Product?

  • Helps keep your wash water clean while you wash
  • Helps protect vehicle's delicate finishes
  • It belongs in your bucket
  • Traps dirt at the bottom of bucket, filtering fresh water to the top
  • Reduces swirls and scratches caused by improper washing
  • Fits snugly at bottom of bucket for maximum dirt capture and scratch-reduction effects
  • Stackable protection: stack in line or rotated 90° to enhance dirt cyclone and filter action
  • Perfect for 3 gallon, 4 gallon, 5 gallon, 6 gallon, and 7 gallon wash buckets
  • Dirt Trap Cyclones funnel and separate dirt away from wash water
  • Cleans mitts, brushes, towels and other washing utensils
  • Cyclone Scrub Ridge around every funnel agitates dirt from wash mitt and directs it directly through funnel
  • Cleaner wash water reduces chances of scratching sensitive paintwork during a wash
  • Geometric Filtering System strikes the perfect balance of funnel size, placement, and volume to maximize filtering effect
  • Tailored for perfect fit and superior filtration in any car wash bucket
  • No moving parts; No disposable filters; No maintenance
  • Fits snugly in any standard 12’’ diameter bucket
  • Comes in multiple colors to avoid cross contamination between paint, wheel, and pad cleaning buckets
  • Does not include a bucket. Need a bucket? Check out the Chemical Guys Detailing Bucket

About Cyclone Dirt Trap

The Car Wash Filter that never stops! As easy as a drop in the bucket!

The Cyclone Dirt Trap bucket insert sits at the bottom of your bucket while you wash filtering water non-stop. It's the filter that never stops. The cyclone Dirt Trap help eliminates wash swirls and scratches with Cyclone Dirt-Trap Filtration Technology. The round wash screen separates abrasive dirt and silt from clean and soapy wash water with scores of cyclonic dirt funnels. Separating dirt from clean and soapy water keeps abrasive debris off the wash mitt, and therefore off the paintwork for a scratch-less car wash. Traditional wash baffles use large vertical screens or disposable mesh filters in an attempt to separate dirt from water, which always ends up cloudy with loose contamination and abrasive filth. These designs are defeated by the mere act of dunking the mitt into the bucket, which pushes and pulls water and dirt straight through the vertical openings of the poorly-designed screens. The cyclone funnels of the Dirt Trap separate dirt through centripetal force and push it through tiny holes underneath the wash screen. The dirt remains trapped underneath the funnels and cannot easily flow back up through the tips once the mitt is pulled out from the water. The one way Cyclone Filtration system is a passive filter that never needs replacing and does not rely on moving parts, no disposable filters, and requires no maintenance or energy to set up, use, or store.

The easiest filter you will ever use. Just drop it in the bucket.

Simply place a Dirt Trap at the bottom of the soap bucket and rinse bucket to keep the wash mitt and water free of the dirt removed off the vehicle. While other wash screens fit loosely and float because of lightweight materials, the Dirt Trap uses a tailored fit and dense plastic to fit snugly at the bottom of any standard bucket, and stay there for maximum filtration. Use the Dirt Trap with the two-bucket wash method and foam gun to dramatically reduce the amount of dirt floating in the water and the abrasive action on sensitive paint that causes swirls and scratches. Choose the Dirt Trap for every wash, and maintain a scratch-free shine on any car, truck, motorcycle, SUV, or RV.

How It Works: Cyclone Dirt Trap Technology

Dirt Trap Cyclones funnel and separate dirt away from wash water. The Dirt Trap car wash guard uses nearly 300 cyclone funnels to separate abrasive dirt and debris from car wash water. Keeping the dirt already washed away from the car reduces the chances of installing swirls and scratches caused by scrubbing with abrasive dirt. Traditional car wash strainers use large open screens and vertical fins in an attempt to hold dirt at the bottom of a wash bucket. However, the mere act of dunking the dirty wash mitt in and out of the bucket pushes and pulls any dirt and debris straight up through the screen and back into the clean water. This traps the dirt already washed off the car in the mitt, and causes abrasive scratching action on the next cleaning pass. The small funnels of the Dirt Trap create cyclonic flow down through the tiny tip of each funnel, spinning heavier dirt particles out of the water through intense centripetal force. The textured underside and small holes of the screen act as a one-way valve: dirt is pushed through the funnels with cyclonic force, but it gets trapped underneath the guard and cannot easily flow back up into the water when the wash mitt is withdrawn. Use the Dirt Trap in each wash and rinse bucket to minimize the chances of scratching and swirling paintwork during any car wash or full detail.

Advanced Geometric Filtering System

297 geometrically-positioned dirt trap cyclones deliver optimal filtration. Maximizing dirt capture and water flow in a wash bucket takes a great deal of engineering. Place too many holes, and the cones become too small to let any dirt particles through. Install too few cones, and the holes end up being big enough to allow particles to flow back up into the clean wash water. The Dirt Trap’s unique Geometric Filtering System strikes the perfect balance between cone size, dirt aperture diameter, funnel pitch, and strategic placement for maximum particle capture. The Dirt Trap is the future of car wash bucket filter technology, and will save car owners from installing billions of tiny swirls and scratches with every car wash.

Uni-Directional Filtration: Keeps Dirt Trapped Under The Filter And Off Your Car

Uni-Directional Filtration keeps dirt trapped under the Dirt Trap Cyclones to reduce scratches, swirls, and paint damage caused during washing. Old world wash screens allow water and dirt to flow through vertically. Whenever a mitt is dunked into the bucket, the downward force pushes water and dirt down past the screen, but it also pushes any settled dirt back up straight into the cleaner water of the bucket. The textured underside and small holes of the Dirt Trap screen act as a one-way valve: dirt is pushed through the cyclone funnels and is trapped underneath the guard where it cannot flow back into the clean water. The Uni-Directional Filtration of the Dirt Trap keeps dirt away from cleaner wash water and off the wash mitt to drastically reduce the chances of installing swirls and scratches on any vehicle during a wash.

Stackable And Versatile For Advanced Car Wash Scratch Protection

The Dirt Trap car wash bucket insert protects vehicles in more ways than one. Put one Dirt Trap insert in each wash and rinse bucket to trap abrasive dirt and debris away from the cleaner wash water. Stack two Dirt Traps in line to double the cyclonic effect in each funnel and pull more dirt out from the wash water. Rotate one Dirt Trap 90°, then stack to stagger the Dirt Trap Cyclones, trapping dirt particles beneath a more complex route through which it would have to backflow. Scrub used compound and paint residue from buffing and polishing pads with the Cyclone Scrub Ridges of the Dirt Trap insert to restore full cut and correction power on any foam or microfiber buffing pad. The uses for the Dirt Trap go far beyond a mere grit guard for a car wash bucket. Protect your car’s shine and reflection at every step with the Dirt Trap car wash bucket insert.

Tailored For Superior Fit And Results

Cheaper car wash screens fit loosely at best and are not dense enough to stay beneath the water. After a couple dunks in the bucket, you’ll find these wash screens floating up with the bubbles, or crammed sideways awkwardly letting water and dirt flow freely by. The Dirt Trap is tailored to fit snugly at the bottom of any car wash bucket for superior filtration and dirt stopping power. Plastic wash buckets flex and swell once filled with water, changing the shape and internal dimensions. The Dirt Trap is specifically engineered to stick snugly at the bottom of a full wash bucket. Sticking the screen at the bottom of the bucket ensures proper water flow down through the Dirt Trap Cyclones, separating dirt and abrasive particles from the cleaner water in the rinse and wash buckets. The Dirt Trap even sticks down when pulling out the wash mitt, helping to trap dirt particles underneath the Dirt Trap Cyclone funnels and the textured underside of the wash screen. Pair up the Dirt Trap with the Heavy Duty Detailing Bucket for superior fit and results at every car wash.

Enhanced Scrubbing Action Keeps Wash Mitts Clean

Every Dirt Trap bucket insert is molded with Cyclone Scrub Ridge rings around every dirt cyclone funnel. Rub the wash mitt directly on the Dirt Trap to scrub and agitate any embedded dirt and grime from the wash fibers, then funnel and trap it directly underneath the insert. The Cyclone Scrub Ridges are designed with the perfect grip and height to work with any chenille, microfiber, or natural lambswool car wash mitt, natural car wash sea sponge, or boars hair wash brush. The ridges are gentle on natural and manmade fibers, and will not tear apart or destroy any car wash mitt, sponge, or brush. Knock dirt, dust, grease, and grime off the car wash mitt with the scrubbing ridge, then funnel it directly down underneath the bucket insert to trap it away from the cleaner water in the bucket. Adding the Dirt Trap to the two bucket method reduces the chances of installing any swirls or scratches during a normal wash dramatically. Keep wash mitts, wash water, and any painted automotive finish cleaner and scratch-free with the Chemical Guys Dirt Trap car wash bucket insert.

How To Use:
  1. Use the two bucket method to reduce swirls and scratches with every car wash
  2. Fill each bucket with 4 - 5 gallons of clean water
  3. Press the Dirt Trap firmly into the bucket until it sits flush and snugly at the bottom
  4. Add 1 - 3 ounces of your favorite Chemical Guys car wash soap in the wash bucket
  5. Rinse car well to remove large particles and loose debris
  6. Dunk car wash mitt into the soap solution bucket, then wash the vehicle top to bottom one panel at a time
  7. Dunk the dirty mitt in the rinse bucket and scrub directly onto the Cyclone Scrub Ridges to agitate dirt from the mitt
  8. Wring mitt out on the ground to flush out any loose dirt
  9. Dunk mitt back in soap bucket and continue to wash car
  10. Rinse off both sides of Dirt Trap and store in cool dry place between uses
Vehicle Application Data
Manufacturer Chemical Guys
Shipping 1-3 Business Days From our Facility
Vehicle Application Data
Make Model
Audi 2011-Present (C7 Chassis)
Audi Audi A3 8P 2006-2008
Audi Audi A3 8P 2009-2013
Audi Audi A3 8V 2014-PRESENT
Audi Audi B5 A4 1994-2001
Audi Audi B5 S4 2000-2002
Audi Audi B6 A4 2001-2005
Audi Audi B6 S4 2004-2005
Audi Audi B7 A4 2005-2008
Audi Audi B7 S4 2005.5-2009
Audi Audi B8 A4 2009-2012
Audi Audi B8 A5 2008-2012
Audi Audi B8 S4 2010-2012
Audi Audi B8 S5 2008-2012
Audi Audi B8 S5 Convertible
Audi Audi B8.5 A4 2013-2016
Audi Audi B8.5 A5 2013-2017
Audi Audi B8.5 S4 2013-2017
Audi Audi B8.5 S5 Convertible
Audi Audi B9 2018-Current
Audi Audi B9 A4 2017- Current
Audi Audi B9 A5 2018-Current
Audi Audi B9 S4 2018-Current
Audi Audi C5 A6 1998-2004
Audi Audi C5 Allroad 1999-2005
Audi Audi C6 A6 2005-2011
Audi Audi C7 A6 2012-PRESENT
Audi Audi C7 Allroad 2012-Present
Audi Audi D2 A8 1994-2002
Audi Audi D3 A8 2003-2009
Audi Audi D4 A8 2011-Current
Audi Audi Q5 2009-Current
Audi Audi S3 8V 2015-Current
Audi Audi TT MK1 2000-2006
Audi Audi TT MK2 2007-2014
Audi Audi TT MK3 2016-Current
Audi Audi TTS MK2 2009-2014
Audi Audi TTS MK3 2016-Current
Audi MK2 TTRS 2009-2014
Audi MK3 TTRS 2018-Current
Audi Q3 2015-Current
Audi Q7 2005-2015 (4L Chassis)
Audi Q7 2017-Present (4M Chassis)
Audi R8 Gen 1 2007-2016
Audi R8 Gen 2 2017-Current
Audi RS3 2017-Current
Audi RS7 2014-Current (C7 Chassis)
Audi S6 2012-Current (C7 Chassis)
Audi S7 2012-Current (C7 Chassis)
Audi S8 2012-Current (D4 Chassis)
Audi SQ5 2014-2017
Volkswagen 1998-2005 Beetle
Volkswagen 2003-2005 Beetle Convertible
Volkswagen 2006-2009 MK5 Rabbit
Volkswagen 2006-2010 Beetle
Volkswagen 2006-2010 Beetle Convertible
Volkswagen 2009 Sportwagen
Volkswagen 2009-2011 Tiguan 1
Volkswagen 2009-2012 CC
Volkswagen 2010-2014 Sportwagen
Volkswagen 2012-2018 Tiguan 2
Volkswagen 2012-Present Beetle
Volkswagen 2013-2017 CC
Volkswagen 2018-Current Tiguan MQB
Volkswagen Atlas 2018 - Current
Volkswagen B5 Passat 1998-2001.5
Volkswagen B5.5 Passat 2001.5-2005
Volkswagen B6 Passat 2006-2010
Volkswagen B7 Passat 2012-Present
Volkswagen MK3 GTI 1994-1999.5
Volkswagen MK3 Golf 1994-1999.5
Volkswagen MK3 Jetta 1994-1999.5
Volkswagen MK4 GTI 1999.5-2005.5
Volkswagen MK4 Golf 1999.5-2006
Volkswagen MK4 Jetta 1999.5-2005.5
Volkswagen MK4 R32
Volkswagen MK5 GTI 2006-2009
Volkswagen MK5 Jetta 2005.5-2010
Volkswagen MK5 R32
Volkswagen MK6 GTI 2010-2014
Volkswagen MK6 Golf 2010-2014
Volkswagen MK6 Golf R
Volkswagen MK6 Jetta (Facelift) 2015-2018
Volkswagen MK6 Jetta 2011-2014
Volkswagen MK7 GTI 2015-2017
Volkswagen MK7 Golf 2015-Present
Volkswagen MK7 Golf Alltrack 2017-Present
Volkswagen MK7 Golf R 2015-2017
Volkswagen MK7 Golf Wagon 2015-Present
Volkswagen MK7.5 Facelift GTI 2018-Present
Volkswagen MK7.5 Facelift Golf-R 2018-Present
Volkswagen Touareg 1 2004-2007
Volkswagen Touareg 2 2008-2010
Volkswagen Touareg 3 2011+
Volkswagen VW Eos Parts
Write Your Own Review
You're reviewing:Chemical Guys DIRTTRAP - Cyclone Dirt Trap Car Wash Bucket Insert RED

No Related Posts