Integrated Engineering - Billet Press Fit Timing Belt Drive Gear For 1.8T & 2.0T FSI Engines (6 bolt gear interface)
The store will not work correctly in the case when cookies are disabled.
This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.Privacy Policy
Ships In: Ships Directly from Supplier ?"Ships in" reflects an estimated lead time before this item will leave via the shipping method selected.Please Note: Selecting an expedited shipping method during the checkout process will not change the "Ships in" time frame.
Eliminate the concern of shearing your timing drive gear keyway once-and-for-all with this bullet-proof billet replacement for 2.0T FSI and 1.8T 20V engines.
TECHNICAL INFORMATION
Factory timing gears are notorious for coming loose in high RPM conditions, leading to the keyways completely breaking, causing timing belt failure. We have also seen failures from the powdered metal gears completely disintegrating from small cracks that develop as the bolt is torqued. As a result of these failures, valves bend and pistons become damaged. To find the ultimate solution for the faulty OE timing gear, IE engineers put in serious work and testing to bring a bulletproof solution to the market. With this product, we have completely redesigned the factory interface, removing the weak factory gear and loose-fitting keyway, replacing it with a solid steel gear with a press-fit interface.
CONSTRUCTION
Our gears start out as a solid block of steel and get precisely machined into the finished piece, with special attention taken to the area where the gear meets the crankshaft. Our billet replacement offers a press-fit, so the gear is no longer loose on the end of the crankshaft, eliminating any chance of the gear coming loose and shearing the keyway. We finish them with bright zinc plated finish to prevent against corrosion.
PRODUCT FEATURES
Billet steel construction
Press-fit interference eliminates the chance of failure
Direct ft for 2.0T FSI EA113 engines
Upgrade for 06A 1.8T engines
Zinc plating to combat corrosion
Includes new damper bolts
4 & 6 BOLT CRANK DAMPERS
This press fit timing gear is a direct bolt-on solution for 2.0T FSI EA113 bolt crank damper pulleys. This gear should be used on 2.0T FSI engines when using either the OEM crank damper pulley or aftermarket 6 bolt crank damper pulleys. For high power output 1.8T 20V engines, you may want to upgrade the factory 4 bolt interface to this 6 bolt interface gear. In order to upgrade your 1.8T 20V engine to a 6 bolt interface, you need this IE FSI billet press fit timing gear and Fluidampr FSI crank damper pulley (IE part number FD-551211) as a direct swap solution.
REQUIRES IE / ARP CRANK DAMPER BOLT
The gear must be installed along with an IE/ARP crank damper bolt (IE Part Number: ARP-06A-01).
VEHICLE FITMENT
2.0T FSI EA113 (TIMING BELT DRIVEN) ENGINES
AUDI - A4 2005-2008 (B7) 2.0T FSI
AUDI - A6 2005-2011 (C6) 2.0T FSI
AUDI - A6 Allroad 2005-2011 (C6) 2.0T FSI
AUDI - TT 2008-2015 (MK2 - 8J) 2.0T FSI (TIMING BELT ENGINES ONLY)
AUDI - TTS 2008-2015 (MK2 - 8J) 2.0T FSI
AUDI - A3 2006-2013 (MK2 - 8P) 2.0T FSI (TIMING BELT ENGINES ONLY)