Ships In: Discontinued ? "Ships in" reflects an estimated lead time before this item will leave via the shipping method selected.Please Note: Selecting an expedited shipping method during the checkout process will not change the "Ships in" time frame.
BFI MK7 Torque Arm Insert - Stage 1 - Version 2 - Post 9/15 vehicles - EBFI783M7915DG
On all orders over $99.00
7 days money back gutarantee
We support 24/24h on day
Safe shopping guarantee
Under hard acceleration, the pendulum mount (commonly referred to as the "dogbone" or by VW as the "torque arm") acts to limit rotational movement of the engine. The factory bushings do a satisfactory job, while limiting vibrations, but only during sedate driving conditions. When pushed hard, those bushings flex creating a vague feeling in the engine and gearbox and adding to the dreaded wheel hop phenomenon.
Our pendulum mount torque arm insert fills the voids in the stock rubber bushing, making what was a soft rubber bushing with voids into what behaves like a solid mount. With the insert installed, you will notice that throttle response will feel better and your shifts will feel more crisp and defined, especially on manual transmission cars.
INCLUDES:
Torque arm / dogbone polyurethane insert
Laser cut washer
Steel spacer
High strength grade 10.9 replacement bolt
FITS:
All MQB Platform Vehicles Including MK7 GOLF/GTI & 8V Audi A3/S3 Post 9 /15 Build
SPECIAL NOTE:
You may experience some in-cabin vibrations after installing our insert. These vibrations are most noticeable in reverse and while the a/c is engaged at idle. These are normal and will subdue after approximately 1,000 miles of driving. TDI models will experiencing increased NVH compared to gasoline vehicles due to the design of the diesel engine.
|