{"title":"Neuspeed","description":null,"products":[{"product_id":"mk7-gti-golf-18t-neuspeed-power-module","title":"NEUSPEED Power Module | 1.8L\/2.0L TSI EA888.3","description":"\u003cp\u003e\u003cem\u003eNEUSPEED\u003c\/em\u003e Power Module is a device which easily allows most able person to upgrade the performance of their 2014-up Audi A3 1.8\/2.0 TSI (Gen3 engine) or 2015-up VW GTI 2.0 TSI, Golf R, Golf 1.8 TSI, ALLTRACK (Gen3 engine) without reducing the reliability or integrity of the engine, clutch and driveline. This is the simplest and best alternative or option to chip tuning. The \u003cem\u003eNEUSPEED\u003c\/em\u003e Power Module is an all new design, not some rebranded 3rd party product. It is a plug and play box that intercepts at the MAP and Boost sensors and can be installed or removed within minutes without any detection. There is a convenient two position switch for 91+ premium fuel and 100+ octane race fuel for maximum HP output. The electrical components are housed in a billet aluminum enclosure which is protected from the elements and is designed and manufactured to be positioned within the engine bay of your vehicle. The wire harness is manufactured using automotive quality wiring which is both oil and heat resistant, and has the same OE water proof connectors as used on your engine.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003eNEUSPEED\u003c\/em\u003e Power Module's are designed, engineered and tuned for a specific engine, not a generic box.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eNOTE\u003c\/span\u003e: The USA delivered GTI is under rated from the factory, our dyno shows about 225HP with the boost spiking at 1.3 bar (19 psi) in stock form, so raising the boost to spin the factory turbo to it's peak efficiency whether ECU tuned or Power Module will yield about 260HP in stock engine configuration using 91 octane fuel. Two dyno sheets are available for viewing, vehicles(s) had no other modifications and were running on 91 pump gas for a fair test comparison. One chart shows Stock, Power Module +5 and Power Module +7 runs. Other chart shows Stock, Power Module +7 and ECU Tuned, this dyno chart is a screen shot from a Mustang dyno, so it is not modified or altered in any way.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eFeatures\u003c\/span\u003e:\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eTwo position switch:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e- +5 PSI Increase\u003c\/p\u003e\r\n\u003cp\u003e- +7 PSI Increase\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePower \/ Torque Gain\u003c\/strong\u003e On +5 Setting - 91 Octane Fuel (higher gains obtainable with better octane fuel) :\u003c\/p\u003e\r\n\u003cp\u003e- 1.8 TSI: 30+ HP \/  55+ ft.\/lbs.Torque\u003c\/p\u003e\r\n\u003cp\u003e- 2.0 TSI: 35+ HP \/  70+ ft\/lbs.Torque\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIncreases boost\u003c\/strong\u003e by modifying the charge pressure and map sensor readings\u003c\/p\u003e\r\n\u003cp\u003e- Allows ECU to remain in control of boost\u003c\/p\u003e\r\n\u003cp\u003e- The actual boost is increased by a precise amount\u003c\/p\u003e\r\n\u003cp\u003e- Boost is increased in a gradual, progressive fashion\u003c\/p\u003e\r\n\u003cp\u003e- Uses the closed loop control of the ECU to increase boost\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eReadings in the vacuum region are stock\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e- No effect on cold start\u003c\/p\u003e\r\n\u003cp\u003e- No effect on warm-up\u003c\/p\u003e\r\n\u003cp\u003e- No change to idle, cruise and moderate acceleration modes of operation\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRetains stock ECU programming\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e- No change to factory ECU programming, communication or safety protocols\u003c\/p\u003e\r\n\u003cp\u003e- No ECU TD1 code to void manufactures warranty\u003c\/p\u003e\r\n\u003cp\u003e- Not effected by ECU reprogramming by the dealer\u003c\/p\u003e\r\n\u003cp\u003e- Makes use of existing ECU programming for higher boost levels\u003c\/p\u003e\r\n\u003cp\u003e- Correct Air\/Fuel mixture maintained from the wide band O2 and closed loop mode of the ECU\u003c\/p\u003e\r\n\u003cp\u003e- Ignition timing optimized by the ECU\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eEasy Installation\u003c\/strong\u003e - \u003ca href=\"http:\/\/www.neuspeed.com\/media\/attachments\/348_64.10.15VAG.pdf\" target=\"_blank\"\u003eLink to Install HERE\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e- Plug-and-play intercept at Boost and MAP sensor connector locations\u003c\/p\u003e\r\n\u003cp\u003e- Installation or removal can be completed in a few minutes (depending on model)\u003c\/p\u003e\r\n\u003cp\u003e- No trace Power Module was ever there after removal\u003c\/p\u003e\r\n\u003cp\u003e- Power Module can be sold or installed on another vehicle of the same engine type.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong class=\"note\"\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eFits:\u003c\/span\u003e 2014-up Audi A3\/S3 (8V) 1.8 TSI\/2.0 TSI, TT (8S) and 2015-up VW MK7 GTI including Performance Package, Golf R, Golf 1.8 TSI and ALLTRACK.\u003c\/p\u003e\r\n\u003cp\u003eCARB Pending. Emission testing to be California compliant and any states that follow.\u003c\/p\u003e\r\n\u003cp\u003eDesigned and Engineered Camarillo, California. Made in \u003cspan\u003eUSA\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eNOTE:\u003c\/span\u003e \u003cem\u003eNEUSPEED\u003c\/em\u003e P-FLO Air Intake highly recommended\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eDO NOT USE POWER MODULE IF ECU HAS BEEN TUNED OR MODIFIED\u003c\/p\u003e\r\n\u003cp\u003eSTOCK DIVERTER VALVE RECOMMENDED, NO AFTERMARKET.\u003c\/p\u003e\n\u003cp\u003eNEUSPEED Power Module for MQB\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293460439214,"sku":"64.10.15","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/neuspeed_power_module_for_mk7_-_641015_1.jpg?v=1790056543"},{"product_id":"88-05-03g","title":"RSe05 - 17x8.0 +45mm 5:112 57.1CB (GUN METALLIC - GLOSS)","description":"\u003cp\u003eThe NEUSPEED RSe05 is a light weight alloy wheel with unmatched quality, perfectly spec-ed for your car. With its design adapted from the European touring challenge cars and weighing just a mere 17 Lbs., the RSe05 will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSize: 17x8.0\u003c\/li\u003e\r\n\u003cli\u003eOffset (E.T.): +45mm\u003c\/li\u003e\r\n\u003cli\u003ePCD (Bolt Pattern): 5-112\u003c\/li\u003e\r\n\u003cli\u003eCenter Bore: 57.1mm\u003c\/li\u003e\r\n\u003cli\u003eWeight: 17 lbs.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003eRecommended Tire Size: \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e225\/45R17 (A3, Golf, Jetta)\u003c\/li\u003e\r\n\u003cli\u003e235\/45R17 (B6 Passat\/CC)\u003c\/li\u003e\r\n\u003cli\u003e235\/50R17 (2012~up Passat, Beetle)\u003c\/li\u003e\r\n\u003cli\u003e235\/55R17 (Tiguan)\u003c\/li\u003e\r\n\u003cli\u003e235\/45R17 (Golf MK7)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cb class=\"note\"\u003eNotes:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003eRSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.\u003c\/p\u003e\r\n\u003cp\u003eNeuspeed RSe Wheels require the use of factory lug bolts. Please consult with our tech should you have aftermarket ones to confirm compatibility with our wheels.\u003c\/p\u003e\r\n\u003cp\u003eWheel center cap from late model VWs and Audi vehicles will not seat properly due to change in VW\/Audi tooling. We recommend purchasing the following items from dealer if you prefer using factory emblem with Neuspeed RSe wheels.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCompatible with Brembo, Stoptech and many other BBKs without wheel spacers\/adapters.\u003c\/p\u003e\r\n\u003cp\u003eNEUSPEED recommends \u003ca href=\"http:\/\/www.michelinman.com\/\"\u003eMichelin\u003c\/a\u003e Tires (not included).\u003c\/p\u003e\n\u003cp\u003eRSE05 17x8.0 +45 5-112 (57.1) SATIN GRAPHITE\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293947371694,"sku":"88.05.03NGG","price":350.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/capture_1.png?v=1790056381"},{"product_id":"88-05-03b-88-05-03bs","title":"RSe05 - 17x8.0 +45mm 5:112 57.1CB (BLACK - SATIN)","description":"\u003cp\u003eThe NEUSPEED RSe05 is a light weight alloy wheel with unmatched quality, perfectly spec-ed for your car. With its design adapted from the European touring challenge cars and weighing just a mere 17 Lbs., the RSe05 will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 17x8.0\u003c\/li\u003e\n\u003cli\u003eOffset (E.T.): +45mm\u003c\/li\u003e\n\u003cli\u003ePCD (Bolt Pattern): 5-112\u003c\/li\u003e\n\u003cli\u003eCenter Bore: 57.1mm\u003c\/li\u003e\n\u003cli\u003eWeight: 17 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eRecommended Tire Size: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e225\/45R17 (A3, Golf, Jetta)\u003c\/li\u003e\n\u003cli\u003e235\/45R17 (B6 Passat\/CC)\u003c\/li\u003e\n\u003cli\u003e235\/50R17 (2012~up Passat, Beetle)\u003c\/li\u003e\n\u003cli\u003e235\/55R17 (Tiguan)\u003c\/li\u003e\n\u003cli\u003e235\/45R17 (Golf MK7)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb class=\"note\"\u003eNotes:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eRSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.\u003c\/p\u003e\n\u003cp\u003eNeuspeed RSe Wheels require the use of factory lug bolts. Please consult with our tech should you have aftermarket ones to confirm compatibility with our wheels.\u003c\/p\u003e\n\u003cp\u003eWheel center cap from late model VWs and Audi vehicles will not seat properly due to change in VW\/Audi tooling. We recommend purchasing the following items from dealer if you prefer using factory emblem with Neuspeed RSe wheels.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with Brembo, Stoptech and many other BBKs without wheel spacers\/adapters.\u003c\/p\u003e\n\u003cp\u003eNEUSPEED recommends \u003ca href=\"http:\/\/www.michelinman.com\/\"\u003eMichelin\u003c\/a\u003e Tires (not included).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFactory center caps that fit:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.shopdap.com\/4b0-601-170-a-7zj.html\"\u003eAudi Grey Metallic: 4B0601170A7ZJ\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.shopdap.com\/4b0-601-170-a-lt7.html\"\u003eAudi Black Matte: 4B0601170ALT7\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.shopdap.com\/4b0-601-170-a-ax1.html\"\u003eAudi Black Gloss: 4B0601170AAX1\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.shopdap.com\/3b7601171xrw-vw-wheel-center-cap.html\"\u003eVolkswagen Black\/Chrome : 3B7601171XRW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eRSE05 17x8.0 +45 5-112 (57.1) SATIN BLACK\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293947404462,"sku":"88.05.03BS","price":287.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/capture.png?v=1790056381"},{"product_id":"88-05-03s","title":"RSe05 - 17x8.0 +45mm 5:112 57.1CB (SILVER - GLOSS)","description":"\u003cp\u003eThe NEUSPEED RSe05 is a light weight alloy wheel with unmatched quality, perfectly spec-ed for your car. With its design adapted from the European touring challenge cars and weighing just a mere 17 Lbs., the RSe05 will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSize: 17x8.0\u003c\/li\u003e\r\n\u003cli\u003eOffset (E.T.): +45mm\u003c\/li\u003e\r\n\u003cli\u003ePCD (Bolt Pattern): 5-112\u003c\/li\u003e\r\n\u003cli\u003eCenter Bore: 57.1mm\u003c\/li\u003e\r\n\u003cli\u003eWeight: 17 lbs.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003eRecommended Tire Size: \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e225\/45R17 (A3, Golf, Jetta)\u003c\/li\u003e\r\n\u003cli\u003e235\/45R17 (B6 Passat\/CC)\u003c\/li\u003e\r\n\u003cli\u003e235\/50R17 (2012~up Passat, Beetle)\u003c\/li\u003e\r\n\u003cli\u003e235\/55R17 (Tiguan)\u003c\/li\u003e\r\n\u003cli\u003e235\/45R17 (Golf MK7)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cb class=\"note\"\u003eNotes:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003eRSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.\u003c\/p\u003e\r\n\u003cp\u003eNeuspeed RSe Wheels require the use of factory lug bolts. Please consult with our tech should you have aftermarket ones to confirm compatibility with our wheels.\u003c\/p\u003e\r\n\u003cp\u003eWheel center cap from late model VWs and Audi vehicles will not seat properly due to change in VW\/Audi tooling. We recommend purchasing the following items from dealer if you prefer using factory emblem with Neuspeed RSe wheels.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCompatible with Brembo, Stoptech and many other BBKs without wheel spacers\/adapters.\u003c\/p\u003e\r\n\u003cp\u003eNEUSPEED recommends \u003ca href=\"http:\/\/www.michelinman.com\/\"\u003eMichelin\u003c\/a\u003e Tires (not included).\u003c\/p\u003e\n\u003cp\u003eRSE05 17x8.0 +45 5-112 (57.1) SILVER\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293947437230,"sku":"88.05.03NSG","price":350.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse05_silver.png?v=1790056382"},{"product_id":"88-05-03w","title":"RSE05 17x8.0 +45 5-112 (57.1) WHITE (No Longer Available)","description":"\u003cp\u003eThe NEUSPEED RSe05 is a light weight alloy wheel with unmatched quality, perfectly spec-ed for your car. With its design adapted from the European touring challenge cars and weighing just a mere 17 Lbs., the RSe05 will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSize: 17x8.0\u003c\/li\u003e\r\n\u003cli\u003eOffset (E.T.): +45mm\u003c\/li\u003e\r\n\u003cli\u003ePCD (Bolt Pattern): 5-112\u003c\/li\u003e\r\n\u003cli\u003eCenter Bore: 57.1mm\u003c\/li\u003e\r\n\u003cli\u003eWeight: 17 lbs.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003eRecommended Tire Size: \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e225\/45R17 (A3, Golf, Jetta)\u003c\/li\u003e\r\n\u003cli\u003e235\/45R17 (B6 Passat\/CC)\u003c\/li\u003e\r\n\u003cli\u003e235\/50R17 (2012~up Passat, Beetle)\u003c\/li\u003e\r\n\u003cli\u003e235\/55R17 (Tiguan)\u003c\/li\u003e\r\n\u003cli\u003e235\/45R17 (Golf MK7)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cb class=\"note\"\u003eNotes:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003eRSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.\u003c\/p\u003e\r\n\u003cp\u003eNeuspeed RSe Wheels require the use of factory lug bolts. Please consult with our tech should you have aftermarket ones to confirm compatibility with our wheels.\u003c\/p\u003e\r\n\u003cp\u003eWheel center cap from late model VWs and Audi vehicles will not seat properly due to change in VW\/Audi tooling. We recommend purchasing the following items from dealer if you prefer using factory emblem with Neuspeed RSe wheels.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCompatible with Brembo, Stoptech and many other BBKs without wheel spacers\/adapters.\u003c\/p\u003e\r\n\u003cp\u003eNEUSPEED recommends \u003ca href=\"http:\/\/www.michelinman.com\/\"\u003eMichelin\u003c\/a\u003e Tires (not included).\u003c\/p\u003e\n\u003cp\u003eRSE05 17x8.0 +45 5-112 (57.1) WHITE\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293947469998,"sku":"88.05.03W","price":229.46,"currency_code":"USD","in_stock":true}]},{"product_id":"88-10-13b","title":"RSe10 - 18x8.0 +45mm 5:112 57.1CB (BLACK - SATIN)","description":"\u003cp\u003eRSE10 18X8.0 +45 5-112 (57.1) SATIN BLACK\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293947666606,"sku":"88.10.13NBS","price":398.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/88.10.13b.jpg?v=1790056384"},{"product_id":"88-10-13g","title":"RSe10 - 18x8.0 +45mm 5:112 57.1CB (GUN METALLIC - SATIN)","description":"\u003cp\u003eRSE10 18X8.0 +45 5-112 (57.1) SATIN GRAPHITE\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293947895982,"sku":"88.10.13NGS","price":398.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse10_titan.png?v=1790056385"},{"product_id":"88-10-13br","title":"RSe10 - 18x8.0 +45mm 5:112 57.1CB (BRONZE - SATIN)","description":"\u003cp\u003eRSE10 18X8.0 +45 5-112 (57.1) SATIN BRONZE\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293947928750,"sku":"88.10.13NBRS","price":398.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse10_bron.jpg?v=1790056384"},{"product_id":"88-10-13hb","title":"RSe10 - 18x8.0 +45mm 5:112 57.1CB (HYPER BLACK - GLOSS)","description":"\u003cp\u003eRSE10 18X8.0 +45 5-112 (57.1) HYPER BLACK\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293947961518,"sku":"88.10.13NHSG","price":417.05,"currency_code":"USD","in_stock":true}]},{"product_id":"88-10-13ms","title":"RSe10 - 18x8.0 +45mm 5:112 57.1CB (MACHINED SILVER - GLOSS)","description":"\u003cp\u003eRSE10 18X8.0 +45 5-112 (57.1) MACHINE SILVER\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFactory center caps that fit:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.shopdap.com\/4b0-601-170-a-7zj.html\"\u003eAudi Grey Metallic: 4B0601170A7ZJ\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.shopdap.com\/4b0-601-170-a-lt7.html\"\u003eAudi Black Matte: 4B0601170ALT7\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.shopdap.com\/4b0-601-170-a-ax1.html\"\u003eAudi Black Gloss: 4B0601170AAX1\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.shopdap.com\/3b7601171xrw-vw-wheel-center-cap.html\"\u003eVolkswagen Black\/Chrome : 3B7601171XRW\u003c\/a\u003e\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293947994286,"sku":"88.10.13NMSG","price":417.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse10_silve.png?v=1790056385"},{"product_id":"88-10-14b","title":"RSe10 - 18x9.0 +40mm 5:112 66.5CB (BLACK - SATIN)","description":"\u003cp\u003eRSE10 18X9.0 +40 5-112 (66.5) SATIN BLACK\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293948059822,"sku":"88.10.14BS","price":369.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse10_black_1.jpg?v=1790056385"},{"product_id":"88-10-16b","title":"RSe10 - 18x9.0 +45mm 5:112 66.5CB (BLACK - SATIN)","description":"\u003cp\u003eRSE10 18X9.0 +45 5-112 (66.5) SATIN BLACK\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293948190894,"sku":"88.10.16BS","price":369.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse10_black_2.jpg?v=1790056386"},{"product_id":"88-10-16br","title":"RSe10 - 18x9.0 +45mm 5:112 66.5CB (BRONZE - SATIN)","description":"\u003cp\u003eRSE10 18X9.0 +45 5-112 (66.5) SATIN BRONZE\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293948223662,"sku":"88.10.16BRS","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse10_bron_2.jpg?v=1790056386"},{"product_id":"88-10-16g","title":"RSe10 - 18x9.0 +45mm 5:112 66.5CB (GUN METALLIC - SATIN)","description":"\u003cp\u003eRSE10 18X9.0 +45 5-112 (66.5) SATIN GRAPHITE\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293948289198,"sku":"88.10.16GS","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse10_titan_2.png?v=1790056386"},{"product_id":"88-10-16ms","title":"RSe10 - 18x9.0 +45mm 5:112 66.5CB (MACHINED SILVER - GLOSS)","description":"\u003cp\u003eRSE10 18X9.0 +40 5-112 (66.5) MACHINE SILVER\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293948321966,"sku":"88.10.16MSG","price":409.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse10_silve_2.png?v=1790056387"},{"product_id":"88-10-17b","title":"RSe10 - 18x8.5 +45mm 5:112 57.1CB (BLACK - SATIN)","description":"\u003cp\u003eRSE10 18X8.5 +45 5-112 (57.1) SATIN BLACK\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293949075630,"sku":"88.10.17BS","price":369.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse10_black_3.jpg?v=1790056387"},{"product_id":"88-10-17hb","title":"RSe10 - 18x8.5 +45mm 5:112 57.1CB (HYPER BLACK - GLOSS)","description":"\u003cp\u003eRSE10 18X8.5 +45 5-112 (57.1) HYPER BLACK\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293948354734,"sku":"88.10.17HBG","price":359.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse10_hyper_black.jpg?v=1790056388"},{"product_id":"88-10-17br","title":"RSe10 - 18x8.5 +45mm 5:112 57.1CB (BRONZE - SATIN)","description":"\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e\n\u003cp\u003eRSE10 18X8.5 +45 5-112 (57.1) SATIN BRONZE\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293949173934,"sku":"88.10.17BRS","price":369.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse10_bron_3.jpg?v=1790056388"},{"product_id":"88-10-17ms","title":"RSe10 - 18x8.5 +45mm 5:112 57.1CB (MACHINED SILVER - GLOSS)","description":"\u003cp\u003eRSE10 18X8.5 +45 5-112 (57.1) MACHINE SILVER\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293949141166,"sku":"88.10.17MSG","price":388.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse10_silve_3.png?v=1790056389"},{"product_id":"88-10-17g","title":"RSe10 - 18x8.5 +45mm 5:112 57.1CB (GUN METALLIC - GLOSS)","description":"\u003cp\u003eRSE10 18X8.5 +45 5-112 (57.1) SATIN GRAPHITE\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293949108398,"sku":"88.10.17GG","price":369.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse10_satin_graphite_eabb430f-fed9-4669-91db-9ef31d026bd4.jpg?v=1790056388"},{"product_id":"88-12-03b","title":"RSe12 - 18x8.0 +45mm 5:112 57.1CB (BLACK - SATIN)","description":"\u003cp\u003eIntroducing the all new RSe12 light weight wheels. Inspired by the 19inch NEUSPEED RSe14, the RSe12 features less spokes to optimize the weight saving and visually open up the design, allowing to display your fancy big brake kit. The RSe12 was designed specifically for the VW MKV and MKVI, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers, No hub rings!!\u003c\/p\u003e\r\n\u003cp\u003eWeighing just a mere 19 lbs, The RSe12 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSize: 18x8.0\u003c\/li\u003e\r\n\u003cli\u003eOffset (E.T.): +45mm\u003c\/li\u003e\r\n\u003cli\u003ePCD (Bolt Pattern): 5-112\u003c\/li\u003e\r\n\u003cli\u003eCenter Bore: 57.1mm\u003c\/li\u003e\r\n\u003cli\u003eWeight: 19.0 lbs.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eRecommended Tire Size: \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e225\/40R18 (A3, Golf, Jetta)\u003c\/li\u003e\r\n\u003cli\u003e235\/40R18 (B6 Passat\/CC)\u003c\/li\u003e\r\n\u003cli\u003e235\/45R18 (2012~up Passat, Beetle)\u003c\/li\u003e\r\n\u003cli\u003e235\/50R18 (Tiguan)\u003c\/li\u003e\r\n\u003cli\u003e235\/40R18 (Golf MK7)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"http:\/\/www.neuspeed.com\/news\/17\/neuspeed-rse-wheel-gallery.html\"\u003eVIEW GALLERY\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cb class=\"note\"\u003eNotes:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003eRSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.\u003c\/p\u003e\r\n\u003cp\u003eNeuspeed RSe Wheels require the use of factory lug bolts. Please consult with our tech should you have aftermarket ones to confirm compatibility with our wheels.\u003c\/p\u003e\r\n\u003cp\u003eWheel center cap from late model VWs and Audi vehicles will not seat properly due to change in VW\/Audi tooling. We recommend purchasing the following items from dealer if you prefer using factory emblem with Neuspeed RSe wheels.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCompatible with Brembo, Stoptech and many other BBKs without wheel spacers\/adapters.\u003c\/p\u003e\n\u003cp\u003eRSE12 18X8.0 +45 5-112 (57.1) SATIN BLACK\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293949272238,"sku":"88.12.03BS","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse12_black.jpg?v=1790056389"},{"product_id":"88-12-03g","title":"RSe12 - 18x8.0 +45mm 5:112 57.1CB (GUN METALLIC - GLOSS)","description":"\u003cp\u003eIntroducing the all new RSe12 light weight wheels. Inspired by the 19inch NEUSPEED RSe14, the RSe12 features less spokes to optimize the weight saving and visually open up the design, allowing to display your fancy big brake kit. The RSe12 was designed specifically for the VW MKV and MKVI, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers, No hub rings!!\u003c\/p\u003e\r\n\u003cp\u003eWeighing just a mere 19 lbs, The RSe12 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSize: 18x8.0\u003c\/li\u003e\r\n\u003cli\u003eOffset (E.T.): +45mm\u003c\/li\u003e\r\n\u003cli\u003ePCD (Bolt Pattern): 5-112\u003c\/li\u003e\r\n\u003cli\u003eCenter Bore: 57.1mm\u003c\/li\u003e\r\n\u003cli\u003eWeight: 19.0 lbs.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eRecommended Tire Size: \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e225\/40R18 (A3, Golf, Jetta)\u003c\/li\u003e\r\n\u003cli\u003e235\/40R18 (B6 Passat\/CC)\u003c\/li\u003e\r\n\u003cli\u003e235\/45R18 (2012~up Passat, Beetle)\u003c\/li\u003e\r\n\u003cli\u003e235\/50R18 (Tiguan)\u003c\/li\u003e\r\n\u003cli\u003e235\/40R18 (Golf MK7)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"http:\/\/www.neuspeed.com\/news\/17\/neuspeed-rse-wheel-gallery.html\"\u003eVIEW GALLERY\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cb class=\"note\"\u003eNotes:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003eRSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.\u003c\/p\u003e\r\n\u003cp\u003eNeuspeed RSe Wheels require the use of factory lug bolts. Please consult with our tech should you have aftermarket ones to confirm compatibility with our wheels.\u003c\/p\u003e\r\n\u003cp\u003eWheel center cap from late model VWs and Audi vehicles will not seat properly due to change in VW\/Audi tooling. We recommend purchasing the following items from dealer if you prefer using factory emblem with Neuspeed RSe wheels.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCompatible with Brembo, Stoptech and many other BBKs without wheel spacers\/adapters.\u003c\/p\u003e\n\u003cp\u003eRSE12 18X8.0 +45 5-112 (57.1) SATIN GRAPHITE\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293949239470,"sku":"88.12.03GG","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse14_graph_543d47a7-6e81-46e3-ab2d-79066368d653.jpg?v=1790056389"},{"product_id":"88-52-03raw","title":"RSE52 18X8.0 +45 5-112 (57.1) UNFINISHED ALUMINUM (No Longer Available)","description":"\u003cp\u003eRSE52 18X8.0 +45 5-112 (57.1) UNFINISHED ALUMINUM\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all new RSe52 light weight wheels, the street 18-inch version of the 17-inch RSe05. Carrying the same concept from NEUSPEED's other wheel line ups, the RSe52 features smooth and simple design lines giving the 'clean' and un-overbearing but yet complimentary to your European design Audi and Volkswagen vehicles.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe52 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers, No hub rings!!\u003c\/p\u003e\r\n\u003cp\u003eThe RSe52 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293949436078,"sku":"88.52.03RAW","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse52_mach_sil_1.jpg?v=1790056391"},{"product_id":"88-102-13g","title":"RSe102 - 19x8.0 +45mm 5:112 57.1CB (GUN METALLIC - SATIN)","description":"\u003cp\u003eRSE102 19X8.0 +45 5-112 (57.1) SATIN GRAPHITE\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950419118,"sku":"88.102.13GS","price":409.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102_2093a410-ad25-466b-9b77-15b50e788770.jpg?v=1790056393"},{"product_id":"88-102-14b","title":"RSe102 - 19x9.0 +40mm 5:112 66.5CB (BLACK - GLOSS)","description":"\u003cp\u003eRSE102 19X9.0 +40 5-112 (66.5) SATIN BLACK\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950484654,"sku":"88.102.14BG","price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102-black_1.jpg?v=1790056393"},{"product_id":"88-102-14br","title":"RSe102 - 19x9.0 +40mm 5:112 66.5CB (BRONZE - SATIN)","description":"\u003cp\u003eRSE102 19X9.0 +40 5-112 (66.5) SATIN BRONZE\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950451886,"sku":"88.102.14BRS","price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102_bronz_1.jpg?v=1790056394"},{"product_id":"88-102-14g","title":"RSe102 - 19x9.0 +40mm 5:112 66.5CB (GUN METALLIC - SATIN)","description":"\u003cp\u003eRSE102 19X9.0 +40 5-112 (66.5) SATIN GRAPHITE\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950550190,"sku":"88.102.14GS","price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102_1.jpg?v=1790056394"},{"product_id":"88-102-14hb","title":"RSe102 - 19x9.0 +40mm 5:112 66.5CB (HYPER BLACK - GLOSS)","description":"\u003cp\u003eRSE102 19X9.0 +40 5-112 (66.5) HYPER BLACK\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950582958,"sku":"88.102.14HBG","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102-_1.jpg?v=1790056394"},{"product_id":"88-102-15b","title":"RSe102 - 19x9.5 +25mm 5:112 66.5CB (BLACK - GLOSS)","description":"\u003cp\u003eRSE102 19X9.5 +25 5-112 (66.5) SATIN BLACK\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950517422,"sku":"88.102.15BG","price":439.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102-black_1_1.jpg?v=1790056394"},{"product_id":"88-102-15br","title":"RSe102 - 19x9.5 +25mm 5:112 66.5CB (BRONZE - SATIN)","description":"\u003cp\u003eRSE102 19X9.5 +25 5-112 (66.5) SATIN BRONZE\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950648494,"sku":"88.102.15BRS","price":455.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102_bronz_2.jpg?v=1790056395"},{"product_id":"88-102-15g","title":"RSe102 - 19x9.5 +25mm 5:112 66.5CB (GUN METALLIC - SATIN)","description":"\u003cp\u003eRSE102 19X9.5 +25 5-112 (66.5) SATIN GRAPHITE\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950615726,"sku":"88.102.15GS","price":455.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102_2.jpg?v=1790056395"},{"product_id":"88-102-15hb","title":"RSe102 - 19x9.5 +25mm 5:112 66.5CB (HYPER BLACK - GLOSS)","description":"\u003cp\u003eRSE102 19X9.5 +25 5-112 (66.5) HYPER BLACK\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950845102,"sku":"88.102.15HBG","price":474.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102-_2.jpg?v=1790056395"},{"product_id":"88-102-16b","title":"RSE102 - Black (Satin) | 19X9.0  - ET45 | 5x112 - 66.5CB","description":"\u003cp\u003eRSE102 19X9.0 +45 5-112 (66.5) GLOSS BLACK\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950681262,"sku":"88.102.16BG","price":398.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102-black_2.jpg?v=1790056395"},{"product_id":"88-102-16g","title":"RSE102 - Gun Metallic (Satin) | 19X9.0  - ET45 | 5x112 - 66.5CB","description":"\u003cp\u003eRSE102 19X9.0 +45 5-112 (66.5) SATIN GRAPHITE\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950746798,"sku":"88.102.16GS","price":398.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102_3.jpg?v=1790056396"},{"product_id":"88-102-16br","title":"RSE102 - Bronze (Satin) | 19X9.0  - ET45 | 5x112 - 66.5CB","description":"\u003cp\u003eRSE102 19X9.0 +45 5-112 (66.5) SATIN BRONZE\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950779566,"sku":"88.102.16BRS","price":398.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102_bronz_3.jpg?v=1790056396"},{"product_id":"88-102-16hb","title":"RSE102 - Hyper Black (Satin) | 19X9.0  - ET45 | 5x112 - 66.5CB","description":"\u003cp\u003eRSE102 19X9.0 +45 5-112 (66.5) HYPER BLACK\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950812334,"sku":"88.102.16HBG","price":417.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102-_3.jpg?v=1790056397"},{"product_id":"88-102-17b","title":"RSe102 - 19x8.5 +45mm 5:112 57.1CB (BLACK - GLOSS)","description":"\u003cp\u003eRSE102 19X8.5 +45 5-112 (57.1) GLOSS BLACK\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293951631534,"sku":"88.102.17BG","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102-black_2_1.jpg?v=1790056397"},{"product_id":"88-102-17hb","title":"RSe102 - 19x8.5 +45mm 5:112 57.1CB (HYPER BLACK - GLOSS)","description":"\u003cp\u003eRSE102 19X8.5 +45 5-112 (57.1) HYPER BLACK\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950877870,"sku":"88.102.17NHSG","price":455.05,"currency_code":"USD","in_stock":true}]},{"product_id":"88-102-17br","title":"RSe102 - 19x8.5 +45mm 5:112 57.1CB (BRONZE - SATIN)","description":"\u003cp\u003eRSE102 19X8.5 +45 5-112 (57.1) - SATIN BRONZE\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293951795374,"sku":"88.102.17BRS","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102_bronz_4.jpg?v=1790056397"},{"product_id":"88-102-17g","title":"RSe102 - 19x8.5 +45mm 5:112 57.1CB (GUN METALLIC - SATIN)","description":"\u003cp\u003eRSE102 19X8.5 +45 5-112 (57.1) SATIN GRAPHITE\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe102 lightweight wheels, a modern rendition of our classic and original full forged RS10.\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) -- no spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as NEUSPEED's other wheels, the RSe102 is manufactured utilizing a Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces an ultra-lightweight wheel similar to full forged wheels but a fraction of the cost.\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293951762606,"sku":"88.102.17GS","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102_4.jpg?v=1790056397"},{"product_id":"88-102-24b","title":"RSe102 - 20x9.0 +40mm 5:112 66.5CB (BLACK - GLOSS)","description":"\u003cp\u003eIntroducing the all new RSe102 light weight wheels, a modern rendition of our classic and original full forged RS10 (below).\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design. \u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as \u003cem\u003eNEUSPEED\u003c\/em\u003e's other wheels, the RSe102 is manufactured utilizing Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces ultra light weight wheel similar to full forged wheels but fraction of the cost. \u003cbr\u003e\u003cbr\u003eWeighing just a mere 21.7 lbs, The RSe102 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSize: 20x9.0\u003c\/li\u003e\r\n\u003cli\u003eOffset (E.T.): +40mm\u003c\/li\u003e\r\n\u003cli\u003ePCD (Bolt Pattern): 5-112\u003c\/li\u003e\r\n\u003cli\u003eCenter Bore: 66.5mm \/ 57.1mm (with hub ring)\u003c\/li\u003e\r\n\u003cli\u003eWeight: 21.7 lbs.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eRecommended Tire Size:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi A4 (B8): 255 or 265\/30R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi A6 (C7): 255 or 265\/35R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eVW Passat CC: 245\/30R20\u003c\/li\u003e\r\n\u003cli\u003eVW Passat B7: 245\/35R20\u003c\/li\u003e\r\n\u003cli\u003eVW Tiguan: 255\/35R20\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cb class=\"note\"\u003eNotes:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003eWill not fit Audi TTRS 8S - 5mm spacer is required.\u003c\/p\u003e\r\n\u003cp\u003eRSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.\u003c\/p\u003e\r\n\u003cp\u003eNeuspeed RSe Wheels require the use of factory lug bolts. Please consult with our tech should you have aftermarket ones to confirm compatibility with our wheels.\u003c\/p\u003e\r\n\u003cp\u003eWheel center cap from late model VWs and Audi vehicles will not seat properly due to change in VW\/Audi tooling. We recommend purchasing the following items from dealer if you prefer using factory emblem with Neuspeed RSe wheels.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCompatible with Brembo, Stoptech and many other BBKs without wheel spacers\/adapters.\u003c\/p\u003e\r\n\u003cp\u003eNEUSPEED recommends \u003ca href=\"http:\/\/www.michelinman.com\/\"\u003eMichelin\u003c\/a\u003e Tires (not included).\u003c\/p\u003e\n\u003cp\u003eRSE102 20X9.0 +40 5-112 (66.5) SATIN BLACK\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950910638,"sku":"88.102.24BG","price":459.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/capture_4.png?v=1790056398"},{"product_id":"88-102-24br","title":"RSe102 - 20x9.0 +40mm 5:112 66.5CB (BRONZE - SATIN)","description":"\u003cp\u003eIntroducing the all new RSe102 light weight wheels, a modern rendition of our classic and original full forged RS10 (below).\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design. \u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as \u003cem\u003eNEUSPEED\u003c\/em\u003e's other wheels, the RSe102 is manufactured utilizing Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces ultra light weight wheel similar to full forged wheels but fraction of the cost. \u003cbr\u003e\u003cbr\u003eWeighing just a mere 21.7 lbs, The RSe102 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSize: 20x9.0\u003c\/li\u003e\r\n\u003cli\u003eOffset (E.T.): +40mm\u003c\/li\u003e\r\n\u003cli\u003ePCD (Bolt Pattern): 5-112\u003c\/li\u003e\r\n\u003cli\u003eCenter Bore: 66.5mm \/ 57.1mm (with hub ring)\u003c\/li\u003e\r\n\u003cli\u003eWeight: 21.7 lbs.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eRecommended Tire Size:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi A4 (B8): 255 or 265\/30R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi A6 (C7): 255 or 265\/35R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eVW Passat CC: 245\/30R20\u003c\/li\u003e\r\n\u003cli\u003eVW Passat B7: 245\/35R20\u003c\/li\u003e\r\n\u003cli\u003eVW Tiguan: 255\/35R20\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cb class=\"note\"\u003eNotes:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003eWill not fit Audi TTRS 8S - 5mm spacer is required.\u003c\/p\u003e\r\n\u003cp\u003eRSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.\u003c\/p\u003e\r\n\u003cp\u003eNeuspeed RSe Wheels require the use of factory lug bolts. Please consult with our tech should you have aftermarket ones to confirm compatibility with our wheels.\u003c\/p\u003e\r\n\u003cp\u003eWheel center cap from late model VWs and Audi vehicles will not seat properly due to change in VW\/Audi tooling. We recommend purchasing the following items from dealer if you prefer using factory emblem with Neuspeed RSe wheels.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCompatible with Brembo, Stoptech and many other BBKs without wheel spacers\/adapters.\u003c\/p\u003e\r\n\u003cp\u003eNEUSPEED recommends \u003ca href=\"http:\/\/www.michelinman.com\/\"\u003eMichelin\u003c\/a\u003e Tires (not included).\u003c\/p\u003e\n\u003cp\u003eRSE102 20X9.0 +40 5-112 (66.5) SATIN BRONZE\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293950943406,"sku":"88.102.24BRS","price":459.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/capture_5.png?v=1790056398"},{"product_id":"88-102-24g","title":"RSe102 - 20x9.0 +40mm 5:112 66.5CB (GUN METALLIC - SATIN)","description":"\u003cp\u003eIntroducing the all new RSe102 light weight wheels, a modern rendition of our classic and original full forged RS10 (below).\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design. \u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as \u003cem\u003eNEUSPEED\u003c\/em\u003e's other wheels, the RSe102 is manufactured utilizing Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces ultra light weight wheel similar to full forged wheels but fraction of the cost. \u003cbr\u003e\u003cbr\u003eWeighing just a mere 21.7 lbs, The RSe102 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSize: 20x9.0\u003c\/li\u003e\r\n\u003cli\u003eOffset (E.T.): +40mm\u003c\/li\u003e\r\n\u003cli\u003ePCD (Bolt Pattern): 5-112\u003c\/li\u003e\r\n\u003cli\u003eCenter Bore: 66.5mm \/ 57.1mm (with hub ring)\u003c\/li\u003e\r\n\u003cli\u003eWeight: 21.7 lbs.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eRecommended Tire Size:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi A4 (B8): 255 or 265\/30R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi A6 (C7): 255 or 265\/35R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eVW Passat CC: 245\/30R20\u003c\/li\u003e\r\n\u003cli\u003eVW Passat B7: 245\/35R20\u003c\/li\u003e\r\n\u003cli\u003eVW Tiguan: 255\/35R20\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cb class=\"note\"\u003eNotes:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003eWill not fit Audi TTRS 8S - 5mm spacer is required.\u003c\/p\u003e\r\n\u003cp\u003eRSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.\u003c\/p\u003e\r\n\u003cp\u003eNeuspeed RSe Wheels require the use of factory lug bolts. Please consult with our tech should you have aftermarket ones to confirm compatibility with our wheels.\u003c\/p\u003e\r\n\u003cp\u003eWheel center cap from late model VWs and Audi vehicles will not seat properly due to change in VW\/Audi tooling. We recommend purchasing the following items from dealer if you prefer using factory emblem with Neuspeed RSe wheels.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCompatible with Brembo, Stoptech and many other BBKs without wheel spacers\/adapters.\u003c\/p\u003e\r\n\u003cp\u003eNEUSPEED recommends \u003ca href=\"http:\/\/www.michelinman.com\/\"\u003eMichelin\u003c\/a\u003e Tires (not included).\u003c\/p\u003e\n\u003cp\u003eRSE102 20X9.0 +40 5-112 (66.5) SATIN GRAPHITE\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293951664302,"sku":"88.102.24GS","price":459.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/capture_6.png?v=1790056398"},{"product_id":"88-102-24hb","title":"RSe102 - 20x9.0 +40mm 5:112 66.5CB (HYPER BLACK - GLOSS)","description":"\u003cp\u003eIntroducing the all new RSe102 light weight wheels, a modern rendition of our classic and original full forged RS10 (below).\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design. \u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as \u003cem\u003eNEUSPEED\u003c\/em\u003e's other wheels, the RSe102 is manufactured utilizing Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces ultra light weight wheel similar to full forged wheels but fraction of the cost. \u003cbr\u003e\u003cbr\u003eWeighing just a mere 21.7 lbs, The RSe102 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSize: 20x9.0\u003c\/li\u003e\r\n\u003cli\u003eOffset (E.T.): +40mm\u003c\/li\u003e\r\n\u003cli\u003ePCD (Bolt Pattern): 5-112\u003c\/li\u003e\r\n\u003cli\u003eCenter Bore: 66.5mm \/ 57.1mm (with hub ring)\u003c\/li\u003e\r\n\u003cli\u003eWeight: 21.7 lbs.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eRecommended Tire Size:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi A4 (B8): 255 or 265\/30R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi A6 (C7): 255 or 265\/35R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eVW Passat CC: 245\/30R20\u003c\/li\u003e\r\n\u003cli\u003eVW Passat B7: 245\/35R20\u003c\/li\u003e\r\n\u003cli\u003eVW Tiguan: 255\/35R20\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cb class=\"note\"\u003eNotes:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003eWill not fit Audi TTRS 8S - 5mm spacer is required.\u003c\/p\u003e\r\n\u003cp\u003eRSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.\u003c\/p\u003e\r\n\u003cp\u003eNeuspeed RSe Wheels require the use of factory lug bolts. Please consult with our tech should you have aftermarket ones to confirm compatibility with our wheels.\u003c\/p\u003e\r\n\u003cp\u003eWheel center cap from late model VWs and Audi vehicles will not seat properly due to change in VW\/Audi tooling. We recommend purchasing the following items from dealer if you prefer using factory emblem with Neuspeed RSe wheels.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCompatible with Brembo, Stoptech and many other BBKs without wheel spacers\/adapters.\u003c\/p\u003e\r\n\u003cp\u003eNEUSPEED recommends \u003ca href=\"http:\/\/www.michelinman.com\/\"\u003eMichelin\u003c\/a\u003e Tires (not included).\u003c\/p\u003e\n\u003cp\u003eRSE102 20X9.0 +40 5-112 (66.5) SATIN HYPER BLACK\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293951697070,"sku":"88.102.24HBG","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/8810224hb_1024x1024_d464b4fe-5f1f-43a2-921e-d96045c2ae68.jpg?v=1790056398"},{"product_id":"88-102-25b","title":"RSe102 - 20x9.5 +25mm 5:112 66.5CB (BLACK - GLOSS)","description":"\u003cp\u003eIntroducing the all new RSe102 light weight wheels, a modern rendition of our classic and original full forged RS10 (below).\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design. \u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as \u003cem\u003eNEUSPEED\u003c\/em\u003e's other wheels, the RSe102 is manufactured utilizing Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces ultra light weight wheel similar to full forged wheels but fraction of the cost. \u003cbr\u003e\u003cbr\u003eWeighing just a mere 23.5 lbs, The RSe102 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSize: 20x9.5\u003c\/li\u003e\r\n\u003cli\u003eOffset (E.T.): +25mm (DEEP CONCAVE)\u003c\/li\u003e\r\n\u003cli\u003ePCD (Bolt Pattern): 5-112\u003c\/li\u003e\r\n\u003cli\u003eCenter Bore: 66.5mm \/ 57.1mm (with hub ring)\u003c\/li\u003e\r\n\u003cli\u003eWeight: 23.5 lbs.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eRecommended Tire Size:\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi RS4 (B7): 255 or 265\/30R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi A5\/S5: 255 or 265\/30R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi Allroad: 255 or 265\/35R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi A7\/S7: 265\/35R20\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cb class=\"note\"\u003eNotes:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003eRSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.\u003c\/p\u003e\r\n\u003cp\u003eNeuspeed RSe Wheels require the use of factory lug bolts. Please consult with our tech should you have aftermarket ones to confirm compatibility with our wheels.\u003c\/p\u003e\r\n\u003cp\u003eWheel center cap from late model VWs and Audi vehicles will not seat properly due to change in VW\/Audi tooling. We recommend purchasing the following items from dealer if you prefer using factory emblem with Neuspeed RSe wheels.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCompatible with Brembo, Stoptech and many other BBKs without wheel spacers\/adapters.\u003c\/p\u003e\r\n\u003cp\u003eNEUSPEED recommends \u003ca href=\"http:\/\/www.michelinman.com\/\"\u003eMichelin\u003c\/a\u003e Tires (not included).\u003c\/p\u003e\n\u003cp\u003eRSE102 20X9.5 +25 5-112 (66.5) SATIN BLACK\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293951729838,"sku":"88.102.25BG","price":469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/capture_7.png?v=1790056398"},{"product_id":"88-102-25br","title":"RSe102 - 20x9.5 +25mm 5:112 66.5CB (BRONZE - SATIN)","description":"\u003cp\u003eIntroducing the all new RSe102 light weight wheels, a modern rendition of our classic and original full forged RS10 (below).\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design. \u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as \u003cem\u003eNEUSPEED\u003c\/em\u003e's other wheels, the RSe102 is manufactured utilizing Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces ultra light weight wheel similar to full forged wheels but fraction of the cost. \u003cbr\u003e\u003cbr\u003eWeighing just a mere 23.5 lbs, The RSe102 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSize: 20x9.5\u003c\/li\u003e\r\n\u003cli\u003eOffset (E.T.): +25mm (DEEP CONCAVE)\u003c\/li\u003e\r\n\u003cli\u003ePCD (Bolt Pattern): 5-112\u003c\/li\u003e\r\n\u003cli\u003eCenter Bore: 66.5mm \/ 57.1mm (with hub ring)\u003c\/li\u003e\r\n\u003cli\u003eWeight: 23.5 lbs.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eRecommended Tire Size:\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi RS4 (B7): 255 or 265\/30R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi A5\/S5: 255 or 265\/30R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi Allroad: 255 or 265\/35R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi A7\/S7: 265\/35R20\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cb class=\"note\"\u003eNotes:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003eRSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.\u003c\/p\u003e\r\n\u003cp\u003eNeuspeed RSe Wheels require the use of factory lug bolts. Please consult with our tech should you have aftermarket ones to confirm compatibility with our wheels.\u003c\/p\u003e\r\n\u003cp\u003eWheel center cap from late model VWs and Audi vehicles will not seat properly due to change in VW\/Audi tooling. We recommend purchasing the following items from dealer if you prefer using factory emblem with Neuspeed RSe wheels.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCompatible with Brembo, Stoptech and many other BBKs without wheel spacers\/adapters.\u003c\/p\u003e\r\n\u003cp\u003eNEUSPEED recommends \u003ca href=\"http:\/\/www.michelinman.com\/\"\u003eMichelin\u003c\/a\u003e Tires (not included).\u003c\/p\u003e\n\u003cp\u003eRSE102 20X9.5 +25 5-112 (66.5) SATIN BRONZE\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293951828142,"sku":"88.102.25BRS","price":469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/capture_8.png?v=1790056399"},{"product_id":"88-102-25g","title":"RSe102 - 20x9.5 +25mm 5:112 66.5CB (GUN METALLIC - SATIN)","description":"\u003cp\u003eIntroducing the all new RSe102 light weight wheels, a modern rendition of our classic and original full forged RS10 (below).\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design. \u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as \u003cem\u003eNEUSPEED\u003c\/em\u003e's other wheels, the RSe102 is manufactured utilizing Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces ultra light weight wheel similar to full forged wheels but fraction of the cost. \u003cbr\u003e\u003cbr\u003eWeighing just a mere 23.5 lbs, The RSe102 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSize: 20x9.5\u003c\/li\u003e\r\n\u003cli\u003eOffset (E.T.): +25mm (DEEP CONCAVE)\u003c\/li\u003e\r\n\u003cli\u003ePCD (Bolt Pattern): 5-112\u003c\/li\u003e\r\n\u003cli\u003eCenter Bore: 66.5mm \/ 57.1mm (with hub ring)\u003c\/li\u003e\r\n\u003cli\u003eWeight: 23.5 lbs.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eRecommended Tire Size:\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi RS4 (B7): 255 or 265\/30R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi A5\/S5: 255 or 265\/30R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi Allroad: 255 or 265\/35R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi A7\/S7: 265\/35R20\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cb class=\"note\"\u003eNotes:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003eRSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.\u003c\/p\u003e\r\n\u003cp\u003eNeuspeed RSe Wheels require the use of factory lug bolts. Please consult with our tech should you have aftermarket ones to confirm compatibility with our wheels.\u003c\/p\u003e\r\n\u003cp\u003eWheel center cap from late model VWs and Audi vehicles will not seat properly due to change in VW\/Audi tooling. We recommend purchasing the following items from dealer if you prefer using factory emblem with Neuspeed RSe wheels.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCompatible with Brembo, Stoptech and many other BBKs without wheel spacers\/adapters.\u003c\/p\u003e\r\n\u003cp\u003eNEUSPEED recommends \u003ca href=\"http:\/\/www.michelinman.com\/\"\u003eMichelin\u003c\/a\u003e Tires (not included).\u003c\/p\u003e\n\u003cp\u003eRSE102 20X9.5 +25 5-112 (66.5) SATIN GRAPHITE\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293951860910,"sku":"88.102.25GS","price":469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/capture_9.png?v=1790056399"},{"product_id":"88-102-25hb","title":"RSe102 - 20x9.5 +25mm 5:112 66.5CB (HYPER BLACK - GLOSS)","description":"\u003cp\u003eIntroducing the all new RSe102 light weight wheels, a modern rendition of our classic and original full forged RS10 (below).\u003c\/p\u003e\r\n\u003cp\u003eThe RSe102 shares the same 10-spoke count but the full-face profile and bevel lip modernize its design. \u003c\/p\u003e\r\n\u003cp\u003eEach RSe102 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers or adapters!\u003c\/p\u003e\r\n\u003cp\u003eThe same as \u003cem\u003eNEUSPEED\u003c\/em\u003e's other wheels, the RSe102 is manufactured utilizing Flow Forming process. It is a hybrid process between low pressure casting and forging technology. This process produces ultra light weight wheel similar to full forged wheels but fraction of the cost. \u003cbr\u003e\u003cbr\u003eWeighing just a mere 23.5 lbs, The RSe102 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSize: 20x9.5\u003c\/li\u003e\r\n\u003cli\u003eOffset (E.T.): +25mm (DEEP CONCAVE)\u003c\/li\u003e\r\n\u003cli\u003ePCD (Bolt Pattern): 5-112\u003c\/li\u003e\r\n\u003cli\u003eCenter Bore: 66.5mm \/ 57.1mm (with hub ring)\u003c\/li\u003e\r\n\u003cli\u003eWeight: 23.5 lbs.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eRecommended Tire Size:\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi RS4 (B7): 255 or 265\/30R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi A5\/S5: 255 or 265\/30R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi Allroad: 255 or 265\/35R20 (agressive fitment)\u003c\/li\u003e\r\n\u003cli\u003eAudi A7\/S7: 265\/35R20\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cb class=\"note\"\u003eNotes:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003eRSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.\u003c\/p\u003e\r\n\u003cp\u003eNeuspeed RSe Wheels require the use of factory lug bolts. Please consult with our tech should you have aftermarket ones to confirm compatibility with our wheels.\u003c\/p\u003e\r\n\u003cp\u003eWheel center cap from late model VWs and Audi vehicles will not seat properly due to change in VW\/Audi tooling. We recommend purchasing the following items from dealer if you prefer using factory emblem with Neuspeed RSe wheels.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCompatible with Brembo, Stoptech and many other BBKs without wheel spacers\/adapters.\u003c\/p\u003e\r\n\u003cp\u003eNEUSPEED recommends \u003ca href=\"http:\/\/www.michelinman.com\/\"\u003eMichelin\u003c\/a\u003e Tires (not included).\u003c\/p\u003e\n\u003cp\u003eRSE102 20X9.5 +25 5-112 (66.5) HYPER BLACK\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293951893678,"sku":"88.102.25HBG","price":489.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse102-_4_1.jpg?v=1790056400"},{"product_id":"88-10-03b","title":"RSe10 - 19x8.0 +45mm 5:112 57.1CB (BLACK - SATIN)","description":"\u003cp\u003eRSE10 19X8.0 +45 5-112 (57.1) SATIN SATIN BLACK\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293952057518,"sku":"88.10.03BS","price":379.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse10_black_4.jpg?v=1790056400"},{"product_id":"88-10-03raw","title":"RSE10 19X8.0 +45 5-112 (57.1) UNFINISHED ALUMINUM (No Longer Available)","description":"\u003cp\u003eRSE10 19X8.0 +45 5-112 (57.1) UNFINISHED ALUMINUM\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003eIntroducing the all-new RSe10 lightweight wheels. As you can expect from NEUSPEED designer, the RSe10 features a clean and simple spoke profile but yet carries enough detail around the lug hole area to separate itself from other split 5-spoke out there in the market.\u003c\/p\u003e\r\n\u003cp\u003eEach RSe10 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable).\u003c\/p\u003e","brand":"Neuspeed","offers":[{"title":"Default Title","offer_id":49293952221358,"sku":"88.10.03RAW","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/rse10_silve_4.png?v=1790056401"}],"url":"https:\/\/www.shopdap.com\/collections\/neuspeed.oembed","provider":"ShopDAP","version":"1.0","type":"link"}