{"title":"Haldex Controller","description":null,"products":[{"product_id":"haldex-controller-mk7-mqb-gen5","title":"Haldex Controller Gen5 0CQ (MQB)","description":"\u003cp\u003eThe haldex AWD system on your car is a system that is not engaged full time.  This plug and play controller allows your to customize your haldex system to perform how you want it to.  This controller is perfect for Street, Track, or Daily Driving. With a variety of modes you can tweek the engagment of the sytems to have full lock up or Map based lock up for a variety of signals.  This controller will also allow you to turn off haldex to do a burnout (to heat up your tires) at the drag strip, then go to full 50\/50 Haldex lock for your optimal launch.  \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOptional Haldex Modes\u003c\/strong\u003e\u003cbr\u003eStock mode\u003cbr\u003eLock Haldex at 100\/0 to 50\/50\u003cbr\u003eMap based on Throttle signal\u003cbr\u003eMap based on Speed signal\u003cbr\u003eMap based on Boost signal\u003cbr\u003eMap based on Throttle and Speed signal\u003cbr\u003eHaldex Off (for Dyno, Burnouts or Fuel Economy)\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLock Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by a fixed value that the user sets with the App\u003cbr\u003eCan be adjusted in increments of 10% (Front\/Rear)\u003cbr\u003e100 \/ 0\u003cbr\u003e90 \/ 10\u003cbr\u003e80 \/ 20\u003cbr\u003e70 \/ 30\u003cbr\u003e60 \/ 40\u003cbr\u003e50 \/ 50\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eThrottle Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by the configured value at a specific throttle position.\u003cbr\u003eThrottle position in increments of 10% (Front\/Rear)\u003cbr\u003e0   – 10% 50 \/ 50\u003cbr\u003e10 – 20% 60 \/ 40\u003cbr\u003e20 – 30% 50 \/ 40\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eVehicle Speed Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by the configured value at a certain velocity.\u003cbr\u003eSpeed in increments of 20 km\/h \u003cbr\u003e0   – 20 km\/h 50 \/ 50\u003cbr\u003e20 – 40 km\/h 60 \/ 40\u003cbr\u003e40 – 60 km\/h 50 \/ 40\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBoost Pressure Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by the configured value at a certain boost pressure.\u003cbr\u003eBoost in steps of 100 mBar (1.45psi)\u003cbr\u003e0 – 100 mBar 50 \/ 50\u003cbr\u003e20 – 40 mBar 60 \/ 40\u003cbr\u003e40 – 60 mBar 50 \/ 40\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePassthru Mode\u003c\/strong\u003e\u003cbr\u003eAll signals from the car are passed thru to the Haldex so it will function like original.\u003cbr\u003eThe display will shows the current Haldex power.\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eAssociated Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca title=\"Manual Switch for Haldex Controller\" href=\"https:\/\/www.shopdap.com\/haldex-controller-manual-switch.html\" target=\"_blank\"\u003eManual Switch\u003c\/a\u003e for Programable Quick Model Selection (to be Wired)\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDownload the Free App\u003c\/strong\u003e\u003cbr\u003eiTunes - \u003ca href=\"https:\/\/apps.apple.com\/us\/app\/haldex-controller\/id1449704651\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eGoogle Play - \u003ca href=\"https:\/\/play.google.com\/apps\/details?id=vanderveerengineering.haldexcontroller\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eOn first start of the App it will search for Bluetooth devices.\u003cbr\u003eSelect the Haldex Controller this device will be saved and used on the next startup.\u003cbr\u003eConnect with pincode 1234.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRelated Info\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow Haldex All Wheel Drive Works - \u003ca title=\"How Haldex AWD Works\" href=\"https:\/\/youtu.be\/tnHPVbSF0cs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe History of Haldex All Wheel Drive - \u003ca title=\"The History of Haldex AWD\" href=\"https:\/\/youtu.be\/rvD0_Ks9Qcs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow to do a Gen 5 Haldex Service - \u003ca title=\"How to do a GEN 5 VW and Audi Haldex Service\" href=\"https:\/\/youtu.be\/dLbWuHiFJLM\" target=\"_blank\"\u003eVIDEO\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHaldex Controller Manual - \u003ca href=\"https:\/\/www.vdveer-engineering.nl\/index.php\/en\/products\/haldex-controller\/haldex-controller-manual\"\u003eManual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eHaldex Controller Gen5 0CQ (MQB)\u003c\/p\u003e","brand":"Van Der Veer Engineering","offers":[{"title":"Default Title","offer_id":49296777085102,"sku":"HDC-G50CQ-PNP","price":1049.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/hdc-g50cq-pnp.jpg?v=1790056585"},{"product_id":"haldex-controller-manual-switch","title":"Haldex Controller Manual Switch","description":"\u003cp\u003eThis 12 position switch is intended to be used with all generation Haldex controllers to allow you to quickly make adjustements on the fly.  \u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.vdveer-engineering.nl\/index.php\/en\/products\/haldex-controller\/haldex-controller-installation\/haldex-controller-manual-switch\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.vdveer-engineering.nl\/index.php\/en\/products\/haldex-controller\/haldex-controller-installation\/haldex-controller-manual-switch\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eHaldex Controller Manual Switch\u003c\/p\u003e","brand":"Van Der Veer Engineering","offers":[{"title":"Default Title","offer_id":49296777052334,"sku":"HDC-MS-SET","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/hdc-ms-set.jpg?v=1790056558"},{"product_id":"haldex-controller-gen1-plug-and-play","title":"Haldex Controller Gen1 (Plug and Play)","description":"\u003cp\u003eThe haldex AWD system on your car is a system that is not engaged full time.  This plug and play controller allows your to customize your 1st generation haldex system to perform how you want it to.  This controller is perfect for Street, Track, or Daily Driving. With a variety of modes you can tweek the engagment of the sytems to have full lock up or Map based lock up for a variety of signals.  This controller will also allow you to turn off haldex to do a burnout (to heat up your tires) at the drag strip, then go to full 50\/50 Haldex lock for your optimal launch.  \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOptional Haldex Modes\u003c\/strong\u003e\u003cbr\u003eStock mode\u003cbr\u003eLock Haldex at 100\/0 to 50\/50\u003cbr\u003eMap based on Throttle signal\u003cbr\u003eMap based on Speed signal\u003cbr\u003eMap based on Boost signal\u003cbr\u003eMap based on Throttle and Speed signal\u003cbr\u003eHaldex Off (for Dyno, Burnouts or Fuel Economy)\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLock Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by a fixed value that the user sets with the App\u003cbr\u003eCan be adjusted in increments of 10% (Front\/Rear)\u003cbr\u003e100 \/ 0\u003cbr\u003e90 \/ 10\u003cbr\u003e80 \/ 20\u003cbr\u003e70 \/ 30\u003cbr\u003e60 \/ 40\u003cbr\u003e50 \/ 50\u003c\/p\u003e\r\n\u003cp\u003e100 \/ 0 is 0% to the haldex unit but the pre charge pump is still active for Gen1 Haldex Systems\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eThrottle Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by the configured value at a specific throttle position.\u003cbr\u003eThrottle position in increments of 10% (Front\/Rear)\u003cbr\u003e0   – 10% 50 \/ 50\u003cbr\u003e10 – 20% 60 \/ 40\u003cbr\u003e20 – 30% 50 \/ 40\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eVehicle Speed Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by the configured value at a certain velocity.\u003cbr\u003eSpeed in increments of 20 km\/h \u003cbr\u003e0   – 20 km\/h 50 \/ 50\u003cbr\u003e20 – 40 km\/h 60 \/ 40\u003cbr\u003e40 – 60 km\/h 50 \/ 40\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBoost Pressure Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by the configured value at a certain boost pressure.\u003cbr\u003eBoost in steps of 100 mBar (1.45psi)\u003cbr\u003e0 – 100 mBar 50 \/ 50\u003cbr\u003e20 – 40 mBar 60 \/ 40\u003cbr\u003e40 – 60 mBar 50 \/ 40\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePassthru Mode\u003c\/strong\u003e\u003cbr\u003eAll signals from the car are passed thru to the Haldex so it will function like original.\u003cbr\u003eThe display will shows the current Haldex power.\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eAssociated Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca title=\"Manual Switch for Haldex Controller\" href=\"https:\/\/www.shopdap.com\/haldex-controller-manual-switch.html\" target=\"_blank\"\u003eManual Switch\u003c\/a\u003e for Programable Quick Model Selection (to be Wired)\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDownload the Free App\u003c\/strong\u003e\u003cbr\u003eiTunes - \u003ca href=\"https:\/\/apps.apple.com\/us\/app\/haldex-controller\/id1449704651\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eGoogle Play - \u003ca href=\"https:\/\/play.google.com\/apps\/details?id=vanderveerengineering.haldexcontroller\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eOn first start of the App it will search for Bluetooth devices.\u003cbr\u003eSelect the Haldex Controller this device will be saved and used on the next startup.\u003cbr\u003eConnect with pincode 1234.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRelated Info\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow Haldex All Wheel Drive Works - \u003ca title=\"How Haldex AWD Works\" href=\"https:\/\/youtu.be\/tnHPVbSF0cs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe History of Haldex All Wheel Drive - \u003ca title=\"The History of Haldex AWD\" href=\"https:\/\/youtu.be\/rvD0_Ks9Qcs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow to do a Gen 5 Haldex Service - \u003ca title=\"How to do a GEN 5 VW and Audi Haldex Service\" href=\"https:\/\/youtu.be\/dLbWuHiFJLM\" target=\"_blank\"\u003eVIDEO\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHaldex Controller Manual - \u003ca href=\"https:\/\/www.vdveer-engineering.nl\/index.php\/en\/products\/haldex-controller\/haldex-controller-manual\"\u003eManual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eHaldex Controller for MK4 R32 and MK1 Audi TT (Gen1 Haldex)\u003c\/p\u003e\r\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: 125px; top: -16px;\"\u003e\r\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"Van Der Veer Engineering","offers":[{"title":"Default Title","offer_id":49296777117870,"sku":"HDC-G1-PNP","price":874.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/hdc-g1-pnp.jpg?v=1790056624"},{"product_id":"haldex-controller-gen4-plug-and-play","title":"Haldex Controller Gen4 (Plug and Play)","description":"\u003cp\u003eThe haldex AWD system on your car is a system that is not engaged full time.  This plug and play controller allows your to customize your 4th generation haldex system to perform how you want it to.  This controller is perfect for Street, Track, or Daily Driving. With a variety of modes you can tweek the engagment of the sytems to have full lock up or Map based lock up for a variety of signals.  This controller will also allow you to turn off haldex to do a burnout (to heat up your tires) at the drag strip, then go to full 50\/50 Haldex lock for your optimal launch.  \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOptional Haldex Modes\u003c\/strong\u003e\u003cbr\u003eStock mode\u003cbr\u003eLock Haldex at 100\/0 to 50\/50\u003cbr\u003eMap based on Throttle signal\u003cbr\u003eMap based on Speed signal\u003cbr\u003eMap based on Boost signal\u003cbr\u003eMap based on Throttle and Speed signal\u003cbr\u003eHaldex Off (for Dyno, Burnouts or Fuel Economy)\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLock Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by a fixed value that the user sets with the App\u003cbr\u003eCan be adjusted in increments of 10% (Front\/Rear)\u003cbr\u003e100 \/ 0\u003cbr\u003e90 \/ 10\u003cbr\u003e80 \/ 20\u003cbr\u003e70 \/ 30\u003cbr\u003e60 \/ 40\u003cbr\u003e50 \/ 50\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eThrottle Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by the configured value at a specific throttle position.\u003cbr\u003eThrottle position in increments of 10% (Front\/Rear)\u003cbr\u003e0   – 10% 50 \/ 50\u003cbr\u003e10 – 20% 60 \/ 40\u003cbr\u003e20 – 30% 50 \/ 40\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eVehicle Speed Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by the configured value at a certain velocity.\u003cbr\u003eSpeed in increments of 20 km\/h \u003cbr\u003e0   – 20 km\/h 50 \/ 50\u003cbr\u003e20 – 40 km\/h 60 \/ 40\u003cbr\u003e40 – 60 km\/h 50 \/ 40\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBoost Pressure Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by the configured value at a certain boost pressure.\u003cbr\u003eBoost in steps of 100 mBar (1.45psi)\u003cbr\u003e0 – 100 mBar 50 \/ 50\u003cbr\u003e20 – 40 mBar 60 \/ 40\u003cbr\u003e40 – 60 mBar 50 \/ 40\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePassthru Mode\u003c\/strong\u003e\u003cbr\u003eAll signals from the car are passed thru to the Haldex so it will function like original.\u003cbr\u003eThe display will shows the current Haldex power.\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eAssociated Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca title=\"Manual Switch for Haldex Controller\" href=\"https:\/\/www.shopdap.com\/haldex-controller-manual-switch.html\" target=\"_blank\"\u003eManual Switch\u003c\/a\u003e for Programable Quick Model Selection (to be Wired)\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDownload the Free App\u003c\/strong\u003e\u003cbr\u003eiTunes - \u003ca href=\"https:\/\/apps.apple.com\/us\/app\/haldex-controller\/id1449704651\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eGoogle Play - \u003ca href=\"https:\/\/play.google.com\/apps\/details?id=vanderveerengineering.haldexcontroller\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eOn first start of the App it will search for Bluetooth devices.\u003cbr\u003eSelect the Haldex Controller this device will be saved and used on the next startup.\u003cbr\u003eConnect with pincode 1234.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRelated Info\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow Haldex All Wheel Drive Works - \u003ca title=\"How Haldex AWD Works\" href=\"https:\/\/youtu.be\/tnHPVbSF0cs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe History of Haldex All Wheel Drive - \u003ca title=\"The History of Haldex AWD\" href=\"https:\/\/youtu.be\/rvD0_Ks9Qcs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow to do a Gen 5 Haldex Service - \u003ca title=\"How to do a GEN 5 VW and Audi Haldex Service\" href=\"https:\/\/youtu.be\/dLbWuHiFJLM\" target=\"_blank\"\u003eVIDEO\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHaldex Controller Manual - \u003ca href=\"https:\/\/www.vdveer-engineering.nl\/index.php\/en\/products\/haldex-controller\/haldex-controller-manual\"\u003eManual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eHaldex Controller Gen4 (Plug and Play)\u003c\/p\u003e","brand":"Van Der Veer Engineering","offers":[{"title":"Default Title","offer_id":49296777216174,"sku":"HDC-G4-PNP","price":874.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/hdc-g4-pnp.jpg?v=1790056567"},{"product_id":"haldex-controller-for-mk5-r32-audi-a3-8p-and-mk2-tt-fsi-or-v6-generation-2-haldex","title":"Haldex Controller for MK5 R32, Audi A3(8P) and MK2 TT (FSI or V6) - Generation 2 Haldex","description":"\u003cp\u003eThe haldex AWD system on your car is a system that is not engaged full time.  This plug and play controller allows your to customize your 2nd generation haldex system to perform how you want it to.  This controller is perfect for Street, Track, or Daily Driving. With a variety of modes you can tweek the engagment of the sytems to have full lock up or Map based lock up for a variety of signals.  This controller will also allow you to turn off haldex to do a burnout (to heat up your tires) at the drag strip, then go to full 50\/50 Haldex lock for your optimal launch.  \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOptional Haldex Modes\u003c\/strong\u003e\u003cbr\u003eStock mode\u003cbr\u003eLock Haldex at 100\/0 to 50\/50\u003cbr\u003eMap based on Throttle signal\u003cbr\u003eMap based on Speed signal\u003cbr\u003eMap based on Boost signal\u003cbr\u003eMap based on Throttle and Speed signal\u003cbr\u003eHaldex Off (for Dyno, Burnouts or Fuel Economy)\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLock Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by a fixed value that the user sets with the App\u003cbr\u003eCan be adjusted in increments of 10% (Front\/Rear)\u003cbr\u003e100 \/ 0\u003cbr\u003e90 \/ 10\u003cbr\u003e80 \/ 20\u003cbr\u003e70 \/ 30\u003cbr\u003e60 \/ 40\u003cbr\u003e50 \/ 50\u003c\/p\u003e\r\n\u003cp\u003e100 \/ 0 is 0% to the haldex unit but the pre charge pump is still active for Gen1 Haldex Systems\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eThrottle Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by the configured value at a specific throttle position.\u003cbr\u003eThrottle position in increments of 10% (Front\/Rear)\u003cbr\u003e0   – 10% 50 \/ 50\u003cbr\u003e10 – 20% 60 \/ 40\u003cbr\u003e20 – 30% 50 \/ 40\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eVehicle Speed Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by the configured value at a certain velocity.\u003cbr\u003eSpeed in increments of 20 km\/h \u003cbr\u003e0   – 20 km\/h 50 \/ 50\u003cbr\u003e20 – 40 km\/h 60 \/ 40\u003cbr\u003e40 – 60 km\/h 50 \/ 40\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBoost Pressure Mode\u003c\/strong\u003e\u003cbr\u003eThe Haldex power is set by the configured value at a certain boost pressure.\u003cbr\u003eBoost in steps of 100 mBar (1.45psi)\u003cbr\u003e0 – 100 mBar 50 \/ 50\u003cbr\u003e20 – 40 mBar 60 \/ 40\u003cbr\u003e40 – 60 mBar 50 \/ 40\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePassthru Mode\u003c\/strong\u003e\u003cbr\u003eAll signals from the car are passed thru to the Haldex so it will function like original.\u003cbr\u003eThe display will shows the current Haldex power.\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eAssociated Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca title=\"Manual Switch for Haldex Controller\" href=\"https:\/\/www.shopdap.com\/haldex-controller-manual-switch.html\" target=\"_blank\"\u003eManual Switch\u003c\/a\u003e for Programable Quick Model Selection (to be Wired)\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDownload the Free App\u003c\/strong\u003e\u003cbr\u003eiTunes - \u003ca href=\"https:\/\/apps.apple.com\/us\/app\/haldex-controller\/id1449704651\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eGoogle Play - \u003ca href=\"https:\/\/play.google.com\/apps\/details?id=vanderveerengineering.haldexcontroller\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eOn first start of the App it will search for Bluetooth devices.\u003cbr\u003eSelect the Haldex Controller this device will be saved and used on the next startup.\u003cbr\u003eConnect with pincode 1234.\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRelated Info\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow Haldex All Wheel Drive Works - \u003ca title=\"How Haldex AWD Works\" href=\"https:\/\/youtu.be\/tnHPVbSF0cs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe History of Haldex All Wheel Drive - \u003ca title=\"The History of Haldex AWD\" href=\"https:\/\/youtu.be\/rvD0_Ks9Qcs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow to do a Gen 5 Haldex Service - \u003ca title=\"How to do a GEN 5 VW and Audi Haldex Service\" href=\"https:\/\/youtu.be\/dLbWuHiFJLM\" target=\"_blank\"\u003eVIDEO\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHaldex Controller Manual - \u003ca href=\"https:\/\/www.vdveer-engineering.nl\/index.php\/en\/products\/haldex-controller\/haldex-controller-manual\"\u003eManual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eHaldex Controller for MK5 R32, Audi A3(8P) and MK2 TT (FSI or V6) - Generation 2 Haldex\u003c\/p\u003e","brand":"Van Der Veer Engineering","offers":[{"title":"Default Title","offer_id":49297753079982,"sku":"HDC-G2-PNP","price":764.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/hdc-g2-pnp__6.jpg?v=1790056629"},{"product_id":"haldex-controller-gen4-stand-alone","title":"Haldex Controller Gen4 (Stand Alone)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e*This module is intended for use in cars that did NOT come from the factory equipped with AWD. If your car already has AWD you would want to purchase the\u003c\/span\u003e \u003cspan style=\"color: #3366ff;\"\u003e\u003ca href=\"https:\/\/www.shopdap.com\/haldex-controller-gen4-plug-and-play.html\"\u003e\u003cspan style=\"color: #3366ff;\"\u003ePlug and Play\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e \u003cspan style=\"color: #ff0000;\"\u003eversion of this module*\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHaldex Controller\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eHaldex Performance Controller to have full control of the Haldex 4Motion system. Used in Dragrace, Track race, Street race and Daily driving. The Haldex Controller can be used in original 4Motion car with a plug and play solution or run the Haldex in a standalone solution in any car from a Golf MK1 to newest cars. The standalone solution does not need any other sensors like the ABS\u003cbr\u003eAll controls will be done with the Haldex Controller App. Switching driving modes, creating Maps and viewing Haldex data.\u003cbr\u003eThe system is fully plug and play for all Haldex models. No need to change or replace parts of the Haldex so the Haldex Controller can be removed just as easy and installed in another car.\u003cbr\u003eAlmost all VAG Haldex systems are supported Gen1 Gen2 Gen4 and Gen5 0AY.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eUsed defined characteristic with different operating modes:\u003c\/strong\u003e\u003cbr\u003eHaldex Off\u003cbr\u003eStock mode\u003cbr\u003eLock Haldex 100\/0 to 50\/50\u003cbr\u003eMap based on Throttle signal\u003cbr\u003eMap based on Speed signal\u003cbr\u003eMap based on Boost signal\u003cbr\u003eMap based on Throttle and Speed signal\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLots of overall options:\u003c\/strong\u003e\u003cbr\u003eStartup mode last used or fixed mode\u003cbr\u003eHaldex disengage on handbrake\u003cbr\u003eHaldex disengage on Brake\u003cbr\u003eBrake ignore\u003cbr\u003eAnd more\u003c\/p\u003e\r\n\u003cp\u003eThe Haldex Controller comes with a control unit a solid and waterproof housing that can be placed inside the trunk or outside the car if needed. Wiring loom set inline plug and play for all original 4Motion cars or a standalone wiring set that has long wires to connect all manually when there is no connection available. The App is free and available in the App store.\u003cbr\u003eThe App will show live information about the Haldex system like how much torque is transmitted to the rear wheels. The App interface is also used to change all settings in the controller and to create Haldex configurations and maps.\u003cbr\u003eThe Haldex Controller does not replace the existing Haldex Controller unit and can only be used with a fully working existing haldex controller\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHaldex Controller Installation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.vdveer-engineering.nl\/index.php\/en\/products\/haldex-controller\/haldex-controller-installation\/haldex-controller-standalone-installation\"\u003eInstructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMore information about the Haldex Controller:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.vdveer-engineering.nl\/products\/haldex-controller\"\u003ehttp:\/\/www.vdveer-engineering.nl\/products\/haldex-controller\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDownload the Free App\u003c\/strong\u003e\u003cbr\u003eiTunes - \u003ca href=\"https:\/\/apps.apple.com\/us\/app\/haldex-controller\/id1449704651\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eGoogle Play - \u003ca href=\"https:\/\/play.google.com\/apps\/details?id=vanderveerengineering.haldexcontroller\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eOn first start of the App it will search for Bluetooth devices.\u003cbr\u003eSelect the Haldex Controller this device will be saved and used on the next startup.\u003cbr\u003eConnect with pincode 1234.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRelated Info\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow Haldex All Wheel Drive Works - \u003ca title=\"How Haldex AWD Works\" href=\"https:\/\/youtu.be\/tnHPVbSF0cs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe History of Haldex All Wheel Drive - \u003ca title=\"The History of Haldex AWD\" href=\"https:\/\/youtu.be\/rvD0_Ks9Qcs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow to do a Gen 5 Haldex Service - \u003ca title=\"How to do a GEN 5 VW and Audi Haldex Service\" href=\"https:\/\/youtu.be\/dLbWuHiFJLM\" target=\"_blank\"\u003eVIDEO\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHaldex Controller Manual - \u003ca href=\"https:\/\/www.vdveer-engineering.nl\/index.php\/en\/products\/haldex-controller\/haldex-controller-manual\"\u003eManual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eHaldex Controller Gen4 (Stand Alone) - HDCG4SA\u003c\/p\u003e","brand":"Van Der Veer Engineering","offers":[{"title":"Default Title","offer_id":49297801740462,"sku":"HDC-G4-SA","price":787.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/gen_2_sa_1.jpg?v=1790056427"},{"product_id":"haldex-controller-gen1-stand-alone","title":"Haldex Controller Gen1 (Stand Alone)","description":"\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e*This module is intended for use in cars that did NOT come from the factory equipped with AWD. If your car already has AWD you would want to purchase the \u003cspan style=\"text-decoration: underline; color: #3366ff;\"\u003e\u003ca href=\"https:\/\/www.shopdap.com\/haldex-controller-gen1-plug-and-play.html\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003ePlug and Play\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e version of this module*\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHaldex Controller\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eHaldex Performance Controller to have full control of the Haldex 4Motion system. Used in Dragrace, Track race, Street race and Daily driving. The Haldex Controller can be used in original 4Motion car with a plug and play solution or run the Haldex in a standalone solution in any car from a Golf MK1 to newest cars. The standalone solution does not need any other sensors like the ABS\u003cbr\u003eAll controls will be done with the Haldex Controller App. Switching driving modes, creating Maps and viewing Haldex data.\u003cbr\u003eThe system is fully plug and play for all Haldex models. No need to change or replace parts of the Haldex so the Haldex Controller can be removed just as easy and installed in another car.\u003cbr\u003eAlmost all VAG Haldex systems are supported Gen1 Gen2 Gen4 and Gen5 0AY.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eUsed defined characteristic with different operating modes:\u003c\/strong\u003e\u003cbr\u003eHaldex Off\u003cbr\u003eStock mode\u003cbr\u003eLock Haldex 100\/0 to 50\/50\u003cbr\u003eMap based on Throttle signal\u003cbr\u003eMap based on Speed signal\u003cbr\u003eMap based on Boost signal\u003cbr\u003eMap based on Throttle and Speed signal\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLots of overall options:\u003c\/strong\u003e\u003cbr\u003eStartup mode last used or fixed mode\u003cbr\u003eHaldex disengage on handbrake\u003cbr\u003eHaldex disengage on Brake\u003cbr\u003eBrake ignore\u003cbr\u003eAnd more\u003c\/p\u003e\r\n\u003cp\u003eThe Haldex Controller comes with a control unit a solid and waterproof housing that can be placed inside the trunk or outside the car if needed. Wiring loom set inline plug and play for all original 4Motion cars or a standalone wiring set that has long wires to connect all manually when there is no connection available. The App is free and available in the App store.\u003cbr\u003eThe App will show live information about the Haldex system like how much torque is transmitted to the rear wheels. The App interface is also used to change all settings in the controller and to create Haldex configurations and maps.\u003cbr\u003eThe Haldex Controller does not replace the existing Haldex Controller unit and can only be used with a fully working existing haldex controller\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHaldex Controller Installation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.vdveer-engineering.nl\/index.php\/en\/products\/haldex-controller\/haldex-controller-installation\/haldex-controller-standalone-installation\"\u003eInstructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMore information about the Haldex Controller:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.vdveer-engineering.nl\/products\/haldex-controller\"\u003ehttp:\/\/www.vdveer-engineering.nl\/products\/haldex-controller\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDownload the Free App\u003c\/strong\u003e\u003cbr\u003eiTunes - \u003ca href=\"https:\/\/apps.apple.com\/us\/app\/haldex-controller\/id1449704651\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eGoogle Play - \u003ca href=\"https:\/\/play.google.com\/apps\/details?id=vanderveerengineering.haldexcontroller\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eOn first start of the App it will search for Bluetooth devices.\u003cbr\u003eSelect the Haldex Controller this device will be saved and used on the next startup.\u003cbr\u003eConnect with pincode 1234.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRelated Info\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow Haldex All Wheel Drive Works - \u003ca title=\"How Haldex AWD Works\" href=\"https:\/\/youtu.be\/tnHPVbSF0cs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe History of Haldex All Wheel Drive - \u003ca title=\"The History of Haldex AWD\" href=\"https:\/\/youtu.be\/rvD0_Ks9Qcs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow to do a Gen 5 Haldex Service - \u003ca title=\"How to do a GEN 5 VW and Audi Haldex Service\" href=\"https:\/\/youtu.be\/dLbWuHiFJLM\" target=\"_blank\"\u003eVIDEO\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHaldex Controller Manual - \u003ca href=\"https:\/\/www.vdveer-engineering.nl\/index.php\/en\/products\/haldex-controller\/haldex-controller-manual\"\u003eManual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eHaldex Controller Gen1 (Stand Alone) - HDCG1SA\u003c\/p\u003e","brand":"Van Der Veer Engineering","offers":[{"title":"Default Title","offer_id":49297801674926,"sku":"HDC-G1-SA","price":874.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/gen_1_haldex_sa.jpg?v=1790056427"},{"product_id":"haldex-controller-for-mk5-r32-audi-a3-8p-and-mk2-tt-fsi-or-v6-generation-2-haldex-stand-alone","title":"Haldex Controller for MK5 R32, Audi A3(8P) and MK2 TT (FSI or V6) - Generation 2 Haldex (Stand Alone)","description":"\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e*This module is intended for use in cars that did NOT come from the factory equipped with AWD. If your car already has AWD you would want to purchase the \u003cspan style=\"text-decoration: underline; color: #3366ff;\"\u003e\u003ca href=\"https:\/\/www.shopdap.com\/haldex-controller-for-mk5-r32-audi-a3-8p-and-mk2-tt-fsi-or-v6-generation-2-haldex.html\"\u003e\u003cspan style=\"color: #3366ff; text-decoration: underline;\"\u003ePlug and Play\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e version of this module*\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHaldex Controller\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eHaldex Performance Controller to have full control of the Haldex 4Motion system. Used in Dragrace, Track race, Street race and Daily driving. The Haldex Controller can be used in original 4Motion car with a plug and play solution or run the Haldex in a standalone solution in any car from a Golf MK1 to newest cars. The standalone solution does not need any other sensors like the ABS\u003cbr\u003eAll controls will be done with the Haldex Controller App. Switching driving modes, creating Maps and viewing Haldex data.\u003cbr\u003eThe system is fully plug and play for all Haldex models. No need to change or replace parts of the Haldex so the Haldex Controller can be removed just as easy and installed in another car.\u003cbr\u003eAlmost all VAG Haldex systems are supported Gen1 Gen2 Gen4 and Gen5 0AY.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eUsed defined characteristic with different operating modes:\u003c\/strong\u003e\u003cbr\u003eHaldex Off\u003cbr\u003eStock mode\u003cbr\u003eLock Haldex 100\/0 to 50\/50\u003cbr\u003eMap based on Throttle signal\u003cbr\u003eMap based on Speed signal\u003cbr\u003eMap based on Boost signal\u003cbr\u003eMap based on Throttle and Speed signal\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLots of overall options:\u003c\/strong\u003e\u003cbr\u003eStartup mode last used or fixed mode\u003cbr\u003eHaldex disengage on handbrake\u003cbr\u003eHaldex disengage on Brake\u003cbr\u003eBrake ignore\u003cbr\u003eAnd more\u003c\/p\u003e\r\n\u003cp\u003eThe Haldex Controller comes with a control unit a solid and waterproof housing that can be placed inside the trunk or outside the car if needed. Wiring loom set inline plug and play for all original 4Motion cars or a standalone wiring set that has long wires to connect all manually when there is no connection available. The App is free and available in the App store.\u003cbr\u003eThe App will show live information about the Haldex system like how much torque is transmitted to the rear wheels. The App interface is also used to change all settings in the controller and to create Haldex configurations and maps.\u003cbr\u003eThe Haldex Controller does not replace the existing Haldex Controller unit and can only be used with a fully working existing haldex controller\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHaldex Controller Installation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.vdveer-engineering.nl\/index.php\/en\/products\/haldex-controller\/haldex-controller-installation\/haldex-controller-standalone-installation\"\u003eInstructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMore information about the Haldex Controller:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.vdveer-engineering.nl\/products\/haldex-controller\"\u003ehttp:\/\/www.vdveer-engineering.nl\/products\/haldex-controller\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDownload the Free App\u003c\/strong\u003e\u003cbr\u003eiTunes - \u003ca href=\"https:\/\/apps.apple.com\/us\/app\/haldex-controller\/id1449704651\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eGoogle Play - \u003ca href=\"https:\/\/play.google.com\/apps\/details?id=vanderveerengineering.haldexcontroller\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eOn first start of the App it will search for Bluetooth devices.\u003cbr\u003eSelect the Haldex Controller this device will be saved and used on the next startup.\u003cbr\u003eConnect with pincode 1234.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRelated Info\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow Haldex All Wheel Drive Works - \u003ca title=\"How Haldex AWD Works\" href=\"https:\/\/youtu.be\/tnHPVbSF0cs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe History of Haldex All Wheel Drive - \u003ca title=\"The History of Haldex AWD\" href=\"https:\/\/youtu.be\/rvD0_Ks9Qcs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow to do a Gen 5 Haldex Service - \u003ca title=\"How to do a GEN 5 VW and Audi Haldex Service\" href=\"https:\/\/youtu.be\/dLbWuHiFJLM\" target=\"_blank\"\u003eVIDEO\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHaldex Controller Manual - \u003ca href=\"https:\/\/www.vdveer-engineering.nl\/index.php\/en\/products\/haldex-controller\/haldex-controller-manual\"\u003eManual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eHaldex Controller for MK5 R32, Audi A3(8P) and MK2 TT (FSI or V6) - Generation 2 Haldex (Stand Alone) - HDCG2SA\u003c\/p\u003e","brand":"Van Der Veer Engineering","offers":[{"title":"Default Title","offer_id":49297801773230,"sku":"HDC-G2-SA","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/gen_2_sa_09eab7d3-ac6a-478e-8533-240e4158c1bf.jpg?v=1790056427"},{"product_id":"haldex-controller-gen5-0cq-mqb-stand-alone","title":"Haldex Controller Gen5 0CQ (MQB) (Stand Alone)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e*This module is intended for use in cars that did NOT come from the factory equipped with AWD. If your car already has AWD you would want to purchase the\u003c\/span\u003e \u003cspan style=\"color: #3366ff;\"\u003e\u003ca href=\"https:\/\/www.shopdap.com\/haldex-controller-mk7-mqb-gen5.html\"\u003e\u003cspan style=\"color: #3366ff;\"\u003ePlug and Play\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e \u003cspan style=\"color: #ff0000;\"\u003eversion of this module*\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHaldex Controller\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eHaldex Performance Controller to have full control of the Haldex 4Motion system. Used in Dragrace, Track race, Street race and Daily driving. The Haldex Controller can be used in original 4Motion car with a plug and play solution or run the Haldex in a standalone solution in any car from a Golf MK1 to newest cars. The standalone solution does not need any other sensors like the ABS\u003cbr\u003eAll controls will be done with the Haldex Controller App. Switching driving modes, creating Maps and viewing Haldex data.\u003cbr\u003eThe system is fully plug and play for all Haldex models. No need to change or replace parts of the Haldex so the Haldex Controller can be removed just as easy and installed in another car.\u003cbr\u003eAlmost all VAG Haldex systems are supported Gen1 Gen2 Gen4 and Gen5 0AY.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eUsed defined characteristic with different operating modes:\u003c\/strong\u003e\u003cbr\u003eHaldex Off\u003cbr\u003eStock mode\u003cbr\u003eLock Haldex 100\/0 to 50\/50\u003cbr\u003eMap based on Throttle signal\u003cbr\u003eMap based on Speed signal\u003cbr\u003eMap based on Boost signal\u003cbr\u003eMap based on Throttle and Speed signal\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLots of overall options:\u003c\/strong\u003e\u003cbr\u003eStartup mode last used or fixed mode\u003cbr\u003eHaldex disengage on handbrake\u003cbr\u003eHaldex disengage on Brake\u003cbr\u003eBrake ignore\u003cbr\u003eAnd more\u003c\/p\u003e\r\n\u003cp\u003eThe Haldex Controller comes with a control unit a solid and waterproof housing that can be placed inside the trunk or outside the car if needed. Wiring loom set inline plug and play for all original 4Motion cars or a standalone wiring set that has long wires to connect all manually when there is no connection available. The App is free and available in the App store.\u003cbr\u003eThe App will show live information about the Haldex system like how much torque is transmitted to the rear wheels. The App interface is also used to change all settings in the controller and to create Haldex configurations and maps.\u003cbr\u003eThe Haldex Controller does not replace the existing Haldex Controller unit and can only be used with a fully working existing haldex controller\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMore information about the Haldex Controller:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.vdveer-engineering.nl\/products\/haldex-controller\"\u003ehttp:\/\/www.vdveer-engineering.nl\/products\/haldex-controller\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDownload the Free App\u003c\/strong\u003e\u003cbr\u003eiTunes - \u003ca href=\"https:\/\/apps.apple.com\/us\/app\/haldex-controller\/id1449704651\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eGoogle Play - \u003ca href=\"https:\/\/play.google.com\/apps\/details?id=vanderveerengineering.haldexcontroller\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eOn first start of the App it will search for Bluetooth devices.\u003cbr\u003eSelect the Haldex Controller this device will be saved and used on the next startup.\u003cbr\u003eConnect with pincode 1234.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRelated Info\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow Haldex All Wheel Drive Works - \u003ca title=\"How Haldex AWD Works\" href=\"https:\/\/youtu.be\/tnHPVbSF0cs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe History of Haldex All Wheel Drive - \u003ca title=\"The History of Haldex AWD\" href=\"https:\/\/youtu.be\/rvD0_Ks9Qcs\" target=\"_blank\"\u003eVIDEO\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHow to do a Gen 5 Haldex Service - \u003ca title=\"How to do a GEN 5 VW and Audi Haldex Service\" href=\"https:\/\/youtu.be\/dLbWuHiFJLM\" target=\"_blank\"\u003eVIDEO\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eHaldex Controller Manual - \u003ca href=\"https:\/\/www.vdveer-engineering.nl\/index.php\/en\/products\/haldex-controller\/haldex-controller-manual\"\u003eManual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eHaldex Controller Gen5 0CQ (MQB) (Stand ALone) - HDCG50CQSA\u003c\/p\u003e","brand":"Van Der Veer Engineering","offers":[{"title":"Default Title","offer_id":49297801805998,"sku":"HDC-G5-0CQ-SA","price":944.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/haldex-controller-gen5.jpg?v=1790056427"}],"url":"https:\/\/www.shopdap.com\/collections\/haldex-controller.oembed","provider":"ShopDAP","version":"1.0","type":"link"}