{"title":"Engine Mount Spacers","description":null,"products":[{"product_id":"ebfi77-m4-sb3-bfi-mk4-mount-spacer-kit-bfi-v2-mounts","title":"BFI MK4 - Mount Spacer Kit - BFI V2 Mounts","description":"\u003cdiv id=\"shopify-section-template--18004563067127__main\" class=\"shopify-section section-main-product page-section-spacing page-section-spacing--no-top-mobile\"\u003e\r\n\u003cdiv data-section-type=\"main-product\" data-components=\"accordion,custom-select,modal\"\u003e\r\n\u003cdiv class=\"product-detail quickbuy-content spaced-row container\"\u003e\r\n\u003cdiv class=\"detail product-column-right cc-animate-init -in cc-animate-complete\" data-cc-animate=\"\" data-cc-animate-delay=\"0.2s\"\u003e\r\n\u003cdiv class=\"product-form theme-init\" data-ajax-add-to-cart=\"true\" data-product-id=\"7543418290423\" data-enable-history-state=\"true\"\u003e\r\n\u003cdiv class=\"not-in-quickbuy\"\u003e\r\n\u003cdiv class=\"product-description rte cf\"\u003eTired of smashing those expensive oil pans on your MK4? Looking to gain a bit of extra clearance, but don't want to raise your car up? These engine mount spacers are the perfect option as they are a simple and quick install that give you an additional 17mm of clearance. Sold as a kit of two spacer plates and two dogbone sleeves, these spacers install between your engine mounts and your engine mount brackets and are fastened with included longer, and most importantly, upgraded 10.9 hardware. These spacers are also fully Machined Finish for corrosion resistance and long lasting durability. Our spacers will last a lifetime. \u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTwo 17mm spacer plates (left \u0026amp; right)\u003c\/li\u003e\r\n\u003cli\u003eTwo 17mm dogbone spacer sleeves\u003c\/li\u003e\r\n\u003cli\u003eUpgraded 10.9 hardware\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cbr\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUpgraded motor mounts are highly recommended when uses these spacers.\u003c\/li\u003e\r\n\u003cli\u003eIn most applications the hood will close without modification but in some instances hood liner will need to be trimmed.\u003c\/li\u003e\r\n\u003cli\u003eVehicles that are significantly lower than stock may experience the axles hitting the frame when using these spacers. Frame notch may be required.\u003c\/li\u003e\r\n\u003cli\u003eWhile these spacers will work with all factory and aftermarket engine and transmission mounts, we cannot guarantee the correct length of hardware for all non-BFI aftermarket mounts.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv id=\"shopify-section-template--18004563067127__recommendations\" class=\"shopify-section section-product-recommendations\"\u003e\r\n\u003cdiv class=\"product-recommendations cc-animate-init -in cc-animate-complete\" data-section-id=\"template--18004563067127__recommendations\" data-url=\"\/recommendations\/products?section_id=template--18004563067127__recommendations\u0026amp;limit=5\u0026amp;product_id=7543418290423\" data-components=\"accordion,modal\" data-cc-animate=\"\"\u003e\r\n\u003cdiv class=\"container container--no-max fully-spaced-row\"\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"BFI","offers":[{"title":"Default Title","offer_id":49297907318958,"sku":"EBFI77-M4-SB3","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/75b036a2faa7ca42696412d6c71114cd_550x.progressive_2.jpg?v=1790056481"},{"product_id":"ebfi77-m4-sb2-bfi-mk4-mount-spacer-kit-bfi-v1-mounts","title":"BFI MK4 - Mount Spacer Kit - BFI V1 Mounts","description":"\u003cdiv id=\"shopify-section-template--18004563067127__main\" class=\"shopify-section section-main-product page-section-spacing page-section-spacing--no-top-mobile\"\u003e\r\n\u003cdiv data-section-type=\"main-product\" data-components=\"accordion,custom-select,modal\"\u003e\r\n\u003cdiv class=\"product-detail quickbuy-content spaced-row container\"\u003e\r\n\u003cdiv class=\"detail product-column-right cc-animate-init -in cc-animate-complete\" data-cc-animate=\"\" data-cc-animate-delay=\"0.2s\"\u003e\r\n\u003cdiv class=\"product-form theme-init\" data-ajax-add-to-cart=\"true\" data-product-id=\"7543418290423\" data-enable-history-state=\"true\"\u003e\r\n\u003cdiv class=\"not-in-quickbuy\"\u003e\r\n\u003cdiv class=\"product-description rte cf\"\u003eTired of smashing those expensive oil pans on your MK4? Looking to gain a bit of extra clearance, but don't want to raise your car up? These engine mount spacers are the perfect option as they are a simple and quick install that give you an additional 17mm of clearance. Sold as a kit of two spacer plates and two dogbone sleeves, these spacers install between your engine mounts and your engine mount brackets and are fastened with included longer, and most importantly, upgraded 10.9 hardware. These spacers are also fully Machined Finish for corrosion resistance and long lasting durability. Our spacers will last a lifetime. \u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTwo 17mm spacer plates (left \u0026amp; right)\u003c\/li\u003e\r\n\u003cli\u003eTwo 17mm dogbone spacer sleeves\u003c\/li\u003e\r\n\u003cli\u003eUpgraded 10.9 hardware\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cbr\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUpgraded motor mounts are highly recommended when uses these spacers.\u003c\/li\u003e\r\n\u003cli\u003eIn most applications the hood will close without modification but in some instances hood liner will need to be trimmed.\u003c\/li\u003e\r\n\u003cli\u003eVehicles that are significantly lower than stock may experience the axles hitting the frame when using these spacers. Frame notch may be required.\u003c\/li\u003e\r\n\u003cli\u003eWhile these spacers will work with all factory and aftermarket engine and transmission mounts, we cannot guarantee the correct length of hardware for all non-BFI aftermarket mounts.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv id=\"shopify-section-template--18004563067127__recommendations\" class=\"shopify-section section-product-recommendations\"\u003e\r\n\u003cdiv class=\"product-recommendations cc-animate-init -in cc-animate-complete\" data-section-id=\"template--18004563067127__recommendations\" data-url=\"\/recommendations\/products?section_id=template--18004563067127__recommendations\u0026amp;limit=5\u0026amp;product_id=7543418290423\" data-components=\"accordion,modal\" data-cc-animate=\"\"\u003e\r\n\u003cdiv class=\"container container--no-max fully-spaced-row\"\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"BFI","offers":[{"title":"Default Title","offer_id":49297907351726,"sku":"EBFI77-M4-SB2","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/75b036a2faa7ca42696412d6c71114cd_550x.progressive_1.jpg?v=1790056481"},{"product_id":"ebfi77-m4-sb1-bfi-mk4-mount-spacer-kit-oem-mounts","title":"BFI MK4 - Mount Spacer Kit - OEM Mounts","description":"\u003cdiv id=\"shopify-section-template--18004563067127__main\" class=\"shopify-section section-main-product page-section-spacing page-section-spacing--no-top-mobile\"\u003e\r\n\u003cdiv data-section-type=\"main-product\" data-components=\"accordion,custom-select,modal\"\u003e\r\n\u003cdiv class=\"product-detail quickbuy-content spaced-row container\"\u003e\r\n\u003cdiv class=\"detail product-column-right cc-animate-init -in cc-animate-complete\" data-cc-animate=\"\" data-cc-animate-delay=\"0.2s\"\u003e\r\n\u003cdiv class=\"product-form theme-init\" data-ajax-add-to-cart=\"true\" data-product-id=\"7543418290423\" data-enable-history-state=\"true\"\u003e\r\n\u003cdiv class=\"not-in-quickbuy\"\u003e\r\n\u003cdiv class=\"product-description rte cf\"\u003eTired of smashing those expensive oil pans on your MK4? Looking to gain a bit of extra clearance, but don't want to raise your car up? These engine mount spacers are the perfect option as they are a simple and quick install that give you an additional 17mm of clearance. Sold as a kit of two spacer plates and two dogbone sleeves, these spacers install between your engine mounts and your engine mount brackets and are fastened with included longer, and most importantly, upgraded 10.9 hardware. These spacers are also fully Machined Finish for corrosion resistance and long lasting durability. Our spacers will last a lifetime. \u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTwo 17mm spacer plates (left \u0026amp; right)\u003c\/li\u003e\r\n\u003cli\u003eTwo 17mm dogbone spacer sleeves\u003c\/li\u003e\r\n\u003cli\u003eUpgraded 10.9 hardware\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cbr\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUpgraded motor mounts are highly recommended when uses these spacers.\u003c\/li\u003e\r\n\u003cli\u003eIn most applications the hood will close without modification but in some instances hood liner will need to be trimmed.\u003c\/li\u003e\r\n\u003cli\u003eVehicles that are significantly lower than stock may experience the axles hitting the frame when using these spacers. Frame notch may be required.\u003c\/li\u003e\r\n\u003cli\u003eWhile these spacers will work with all factory and aftermarket engine and transmission mounts, we cannot guarantee the correct length of hardware for all non-BFI aftermarket mounts.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv id=\"shopify-section-template--18004563067127__recommendations\" class=\"shopify-section section-product-recommendations\"\u003e\r\n\u003cdiv class=\"product-recommendations cc-animate-init -in cc-animate-complete\" data-section-id=\"template--18004563067127__recommendations\" data-url=\"\/recommendations\/products?section_id=template--18004563067127__recommendations\u0026amp;limit=5\u0026amp;product_id=7543418290423\" data-components=\"accordion,modal\" data-cc-animate=\"\"\u003e\r\n\u003cdiv class=\"container container--no-max fully-spaced-row\"\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"BFI","offers":[{"title":"Default Title","offer_id":49297907286190,"sku":"EBFI77-M4-SB1","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/75b036a2faa7ca42696412d6c71114cd_550x.progressive_aaeee24e-5ca6-40c7-9d46-be161dc0ef14.jpg?v=1790056480"},{"product_id":"ebfi77-m3-sb1-bfi-mk3-mount-spacer-kit","title":"BFI MK3 - Mount Spacer Kit","description":"\u003cdiv id=\"shopify-section-template--16755749650679__main\" class=\"shopify-section section-main-product page-section-spacing page-section-spacing--no-top-mobile\"\u003e\r\n\u003cdiv data-section-type=\"main-product\" data-components=\"accordion,custom-select,modal\"\u003e\r\n\u003cdiv class=\"product-detail quickbuy-content spaced-row container\"\u003e\r\n\u003cdiv class=\"detail product-column-right cc-animate-init -in cc-animate-complete\" data-cc-animate=\"\" data-cc-animate-delay=\"0.2s\"\u003e\r\n\u003cdiv class=\"product-form theme-init\" data-ajax-add-to-cart=\"true\" data-product-id=\"7543418257655\" data-enable-history-state=\"true\"\u003e\r\n\u003cdiv class=\"not-in-quickbuy\"\u003e\r\n\u003cdiv class=\"product-description rte cf\"\u003eTired of smashing those expensive oil pans on your MK3? Looking to gain a bit of extra clearance, but don't want to raise your car up? These engine mount spacers are the perfect option as they are a simple and quick install that give you an additional 17mm of clearance. Sold as a kit of 3, these spacers install between your engine mounts and your engine mount brackets and are fastened with included longer, and most importantly, upgraded 10.9 hardware. These spacers are also fully Machined Finish for corrosion resistance and long lasting durability. Our spacers will last a lifetime. \u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThree 17mm spacers - front, rear and trans\u003c\/li\u003e\r\n\u003cli\u003eUpgraded 10.9 hardware\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cbr\u003e\u003cstrong\u003eFITS:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMK3 Golf\/Jetta\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cbr\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUpgraded motor mounts are highly recommended when uses these spacers.\u003c\/li\u003e\r\n\u003cli\u003eIn most applications the hood will close without modification but in some instances hood liner will need to be trimmed.\u003c\/li\u003e\r\n\u003cli\u003eVehicles that are significantly lower than stock may experience the axles hitting the frame when using these spacers.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cbr\u003eBelow, you can see an after shot of our MK3 motor mount spacers installed and just how much higher the engine sits- almost flush with the subframe\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/5\/assets\/description_image_oilpan_jpg?1770053437227421651\" alt=\"Installing BFI MK3 Motor Mount Spacers\" width=\"100%\" height=\"auto\"\u003e\u003c\/center\u003eThis is a side profile shot from the passenger fender showing just how much the engine is raised. In most applications the hood will close without modification but in some instances hood liner will need to be trimmed.\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/5\/assets\/description_image_engineclear_jpg?14956447144230908406\" alt=\"Installing BFI MK3 Motor Mount Spacers\" width=\"100%\" height=\"auto\"\u003e\u003c\/center\u003eA look at the location of installation for the rear engine mount on a MK3 \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/5\/assets\/description_image_installed_jpg?15953463262042734193\" alt=\"Installing BFI MK3 Motor Mount Spacers\" width=\"100%\" height=\"auto\"\u003e\u003ccenter\u003e\u003ca href=\"https:\/\/black-forest-industries.myshopify.com\/pages\/bfi-instructions\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/files\/InstallGuideLink.PNG?9402087562334382062\"\u003e\u003c\/a\u003e\u003c\/center\u003e\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv id=\"shopify-section-template--16755749650679__recommendations\" class=\"shopify-section section-product-recommendations\"\u003e\r\n\u003cdiv class=\"product-recommendations cc-animate-init -in cc-animate-complete\" data-section-id=\"template--16755749650679__recommendations\" data-url=\"\/recommendations\/products?section_id=template--16755749650679__recommendations\u0026amp;limit=5\u0026amp;product_id=7543418257655\" data-components=\"accordion,modal\" data-cc-animate=\"\"\u003e\r\n\u003cdiv class=\"container container--no-max fully-spaced-row\"\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\n\u003cp\u003eBFI MK3 - Mount Spacer Kit - EBFI77-M3-SB1\u003c\/p\u003e","brand":"BFI","offers":[{"title":"Default Title","offer_id":49297907581102,"sku":"EBFI77-M3-SB1","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/mk3mountv2_1200x1200_1.png?v=1790056480"},{"product_id":"bfi-motor-mount-spacer-kit-stock-mounts-manual-transmission","title":"BFI - Motor Mount Spacer Kit (Stock Mounts) - Manual Transmission","description":"\u003cdiv id=\"shopify-section-template--16755749650679__main\" class=\"shopify-section section-main-product page-section-spacing page-section-spacing--no-top-mobile\"\u003e\r\n\u003cdiv data-section-type=\"main-product\" data-components=\"accordion,custom-select,modal\"\u003e\r\n\u003cdiv class=\"product-detail quickbuy-content spaced-row container variant-status--on-sale variant-status--backorder\"\u003e\r\n\u003cdiv class=\"detail product-column-right cc-animate-init -in cc-animate-complete\" data-cc-animate=\"\" data-cc-animate-delay=\"0.2s\"\u003e\r\n\u003cdiv class=\"product-form theme-init\" data-ajax-add-to-cart=\"true\" data-product-id=\"7959759880439\" data-enable-history-state=\"true\"\u003e\r\n\u003cdiv class=\"not-in-quickbuy\"\u003e\r\n\u003cdiv class=\"product-description rte cf\"\u003e\r\n\u003cp\u003eTired of smashing those expensive oil pans on your MK7\/MK8 Golf or Jetta? Looking to gain a bit of extra clearance, but don't want to raise your car up?\u003cbr\u003e\u003cbr\u003eThese engine mount spacers are the perfect option as they are a quick and simple install that give you an additional 17mm of clearance. Sold as a kit of 1 spacer plate, 1 replacement transmission mount boss, and 2 dogbone sleeves. These spacers install between your engine mounts and your engine mount brackets and are fastened with the included longer, and most importantly, upgraded 10.9 hardware. Additionally, these spacers are fully clear anodized for corrosion resistance and long lasting durability. Our spacers will last a lifetime.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBillet Construction\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eUnlike your factory transmission boss (console) which is cast, this engine mount spacer kit comes with a billet machined console, made from 6061-T6. Our billet lift spacers are many times stronger than their factory counterpart. Regardless of the situation, you can drive with the knowledge that these parts are strong enough to take whatever you throw at them.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHeli-Coil\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you have ever had the misfortune of taking your engine mounts on and off multiple times, you'll know that the factory aluminum threads aren't up to the task of repeated removal and torqueing. Over time, these formed aluminum threads weaken and often start to pull, damaging the threaded hole, or increasing the ease of a cross-thread install. To address this issue, we designed our lift spacers to include Heli-Coil stainless steel thread inserts, making the thread connection stronger and repeatedly removeable if necessary.\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\u003cbr\u003e- One 17mm spacer plate \u003cbr\u003e- One replacement Transmission Boss \u003cbr\u003e- Two 17mm dogbone spacer sleeves\u003cbr\u003e- Upgraded 10.9 hardness hardware \u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUpgraded motor mounts are highly recommended when uses these spacers.\u003c\/li\u003e\r\n\u003cli\u003eIn most applications the hood will close without modification but in some instances hood liner will need to be trimmed.\u003c\/li\u003e\r\n\u003cli\u003eVehicles that are significantly lower than stock may experience the axles hitting the frame when using these spacers. Frame notch may be required.\u003c\/li\u003e\r\n\u003cli\u003eWhile these spacers will work with all factory and aftermarket engine and transmission mounts, we cannot guarantee the correct length of hardware for all non-BFI aftermarket mounts.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFITMENT:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi 8V A3\/S3\u003c\/li\u003e\r\n\u003cli\u003eAudi TT\/TTS MK3\u003c\/li\u003e\r\n\u003cli\u003eVW MK7 GTI\/Golf R\u003c\/li\u003e\r\n\u003cli\u003eVW MK7.5 GTI\/Golf R (Manual only) \u003c\/li\u003e\r\n\u003cli\u003eVW MK7 Alltrack\u003c\/li\u003e\r\n\u003cli\u003eVW MK7 Jetta\u003c\/li\u003e\r\n\u003cli\u003eVW Tiguan (Manual AWD only - DQ250) \u003c\/li\u003e\r\n\u003cli\u003eVW MK8 GTI (Manual)\u003c\/li\u003e\r\n\u003cli\u003eVW MK8 Golf R (Manual)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv id=\"shopify-section-template--16755749650679__recommendations\" class=\"shopify-section section-product-recommendations\"\u003e\r\n\u003cdiv class=\"product-recommendations cc-animate-init -in cc-animate-complete\" data-section-id=\"template--16755749650679__recommendations\" data-url=\"\/recommendations\/products?section_id=template--16755749650679__recommendations\u0026amp;limit=5\u0026amp;product_id=7959759880439\" data-components=\"accordion,modal\" data-cc-animate=\"\"\u003e\r\n\u003cdiv class=\"container container--no-max fully-spaced-row\"\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"BFI","offers":[{"title":"Default Title","offer_id":49299505840302,"sku":"EBFI77-K7-SB1-OE","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/motormount_32c713b2-0152-41dd-b5.jpg?v=1790056362"},{"product_id":"bfi-motor-mount-spacer-kit-stock-mounts-dsg-auto-transmission","title":"BFI - Motor Mount Spacer Kit (Stock Mounts) - DSG\/Auto Transmission","description":"\u003cdiv id=\"shopify-section-template--16755749650679__main\" class=\"shopify-section section-main-product page-section-spacing page-section-spacing--no-top-mobile\"\u003e\r\n\u003cdiv data-section-type=\"main-product\" data-components=\"accordion,custom-select,modal\"\u003e\r\n\u003cdiv class=\"product-detail quickbuy-content spaced-row container variant-status--on-sale variant-status--backorder\"\u003e\r\n\u003cdiv class=\"detail product-column-right cc-animate-init -in cc-animate-complete\" data-cc-animate=\"\" data-cc-animate-delay=\"0.2s\"\u003e\r\n\u003cdiv class=\"product-form theme-init\" data-ajax-add-to-cart=\"true\" data-product-id=\"7959759880439\" data-enable-history-state=\"true\"\u003e\r\n\u003cdiv class=\"not-in-quickbuy\"\u003e\r\n\u003cdiv class=\"product-description rte cf\"\u003e\r\n\u003cp\u003eTired of smashing those expensive oil pans on your MK7\/MK8 Golf or Jetta? Looking to gain a bit of extra clearance, but don't want to raise your car up?\u003cbr\u003e\u003cbr\u003eThese engine mount spacers are the perfect option as they are a quick and simple install that give you an additional 17mm of clearance. Sold as a kit of 1 spacer plate, 1 replacement transmission mount boss, and 2 dogbone sleeves. These spacers install between your engine mounts and your engine mount brackets and are fastened with the included longer, and most importantly, upgraded 10.9 hardware. Additionally, these spacers are fully clear anodized for corrosion resistance and long lasting durability. Our spacers will last a lifetime.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBillet Construction\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eUnlike your factory transmission boss (console) which is cast, this engine mount spacer kit comes with a billet machined console, made from 6061-T6. Our billet lift spacers are many times stronger than their factory counterpart. Regardless of the situation, you can drive with the knowledge that these parts are strong enough to take whatever you throw at them.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHeli-Coil\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you have ever had the misfortune of taking your engine mounts on and off multiple times, you'll know that the factory aluminum threads aren't up to the task of repeated removal and torqueing. Over time, these formed aluminum threads weaken and often start to pull, damaging the threaded hole, or increasing the ease of a cross-thread install. To address this issue, we designed our lift spacers to include Heli-Coil stainless steel thread inserts, making the thread connection stronger and repeatedly removeable if necessary.\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\u003cbr\u003e- One 17mm spacer plate \u003cbr\u003e- One replacement Transmission Boss \u003cbr\u003e- Two 17mm dogbone spacer sleeves\u003cbr\u003e- Upgraded 10.9 hardness hardware \u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUpgraded motor mounts are highly recommended when uses these spacers.\u003c\/li\u003e\r\n\u003cli\u003eIn most applications the hood will close without modification but in some instances hood liner will need to be trimmed.\u003c\/li\u003e\r\n\u003cli\u003eVehicles that are significantly lower than stock may experience the axles hitting the frame when using these spacers. Frame notch may be required.\u003c\/li\u003e\r\n\u003cli\u003eWhile these spacers will work with all factory and aftermarket engine and transmission mounts, we cannot guarantee the correct length of hardware for all non-BFI aftermarket mounts.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFITMENT:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi 8V A3\/S3\u003c\/li\u003e\r\n\u003cli\u003eAudi TT\/TTS MK3\u003c\/li\u003e\r\n\u003cli\u003eVW MK7 GTI\/Golf R\u003c\/li\u003e\r\n\u003cli\u003eVW MK7.5 GTI\/Golf R (Manual only) \u003c\/li\u003e\r\n\u003cli\u003eVW MK7 Alltrack\u003c\/li\u003e\r\n\u003cli\u003eVW MK7 Jetta\u003c\/li\u003e\r\n\u003cli\u003eVW Tiguan (Manual AWD only - DQ250) \u003c\/li\u003e\r\n\u003cli\u003eVW MK8 GTI (Manual)\u003c\/li\u003e\r\n\u003cli\u003eVW MK8 Golf R (Manual)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv id=\"shopify-section-template--16755749650679__recommendations\" class=\"shopify-section section-product-recommendations\"\u003e\r\n\u003cdiv class=\"product-recommendations cc-animate-init -in cc-animate-complete\" data-section-id=\"template--16755749650679__recommendations\" data-url=\"\/recommendations\/products?section_id=template--16755749650679__recommendations\u0026amp;limit=5\u0026amp;product_id=7959759880439\" data-components=\"accordion,modal\" data-cc-animate=\"\"\u003e\r\n\u003cdiv class=\"container container--no-max fully-spaced-row\"\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"BFI","offers":[{"title":"Default Title","offer_id":49299505873070,"sku":"EBFI77-K7-SB2-OE","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/motormount-2_8d13dafa-8c8c-4765_1.jpg?v=1790056362"},{"product_id":"bfi-motor-mount-spacer-kit-bfi-v2-mounts-dsg-auto-transmission","title":"BFI MK7\/8 - Mount Spacer Kit - DSG\/Automatic","description":"\u003cdiv id=\"shopify-section-template--16755749650679__main\" class=\"shopify-section section-main-product page-section-spacing page-section-spacing--no-top-mobile\"\u003e\r\n\u003cdiv data-section-type=\"main-product\" data-components=\"accordion,custom-select,modal\"\u003e\r\n\u003cdiv class=\"product-detail quickbuy-content spaced-row container variant-status--on-sale variant-status--backorder\"\u003e\r\n\u003cdiv class=\"detail product-column-right cc-animate-init -in cc-animate-complete\" data-cc-animate=\"\" data-cc-animate-delay=\"0.2s\"\u003e\r\n\u003cdiv class=\"product-form theme-init\" data-ajax-add-to-cart=\"true\" data-product-id=\"7959759880439\" data-enable-history-state=\"true\"\u003e\r\n\u003cdiv class=\"not-in-quickbuy\"\u003e\r\n\u003cdiv class=\"product-description rte cf\"\u003e\r\n\u003cp\u003eTired of smashing those expensive oil pans on your MK7\/MK8 Golf or Jetta? Looking to gain a bit of extra clearance, but don't want to raise your car up?\u003cbr\u003e\u003cbr\u003eThese engine mount spacers are the perfect option as they are a quick and simple install that give you an additional 17mm of clearance. Sold as a kit of 1 spacer plate, 1 replacement transmission mount boss, and 2 dogbone sleeves. These spacers install between your engine mounts and your engine mount brackets and are fastened with the included longer, and most importantly, upgraded 10.9 hardware. Additionally, these spacers are fully clear anodized for corrosion resistance and long lasting durability. Our spacers will last a lifetime.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBillet Construction\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eUnlike your factory transmission boss (console) which is cast, this engine mount spacer kit comes with a billet machined console, made from 6061-T6. Our billet lift spacers are many times stronger than their factory counterpart. Regardless of the situation, you can drive with the knowledge that these parts are strong enough to take whatever you throw at them.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHeli-Coil\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you have ever had the misfortune of taking your engine mounts on and off multiple times, you'll know that the factory aluminum threads aren't up to the task of repeated removal and torqueing. Over time, these formed aluminum threads weaken and often start to pull, damaging the threaded hole, or increasing the ease of a cross-thread install. To address this issue, we designed our lift spacers to include Heli-Coil stainless steel thread inserts, making the thread connection stronger and repeatedly removeable if necessary.\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\u003cbr\u003e- One 17mm spacer plate \u003cbr\u003e- One replacement Transmission Boss \u003cbr\u003e- Two 17mm dogbone spacer sleeves\u003cbr\u003e- Upgraded 10.9 hardness hardware \u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUpgraded motor mounts are highly recommended when uses these spacers.\u003c\/li\u003e\r\n\u003cli\u003eIn most applications the hood will close without modification but in some instances hood liner will need to be trimmed.\u003c\/li\u003e\r\n\u003cli\u003eVehicles that are significantly lower than stock may experience the axles hitting the frame when using these spacers. Frame notch may be required.\u003c\/li\u003e\r\n\u003cli\u003eWhile these spacers will work with all factory and aftermarket engine and transmission mounts, we cannot guarantee the correct length of hardware for all non-BFI aftermarket mounts.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFITMENT:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi 8V A3\/S3\u003c\/li\u003e\r\n\u003cli\u003eAudi TT\/TTS MK3\u003c\/li\u003e\r\n\u003cli\u003eVW MK7 GTI\/Golf R\u003c\/li\u003e\r\n\u003cli\u003eVW MK7.5 GTI\/Golf R (Manual only) \u003c\/li\u003e\r\n\u003cli\u003eVW MK7 Alltrack\u003c\/li\u003e\r\n\u003cli\u003eVW MK7 Jetta\u003c\/li\u003e\r\n\u003cli\u003eVW Tiguan (Manual AWD only - DQ250) \u003c\/li\u003e\r\n\u003cli\u003eVW MK8 GTI (Manual)\u003c\/li\u003e\r\n\u003cli\u003eVW MK8 Golf R (Manual)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv id=\"shopify-section-template--16755749650679__recommendations\" class=\"shopify-section section-product-recommendations\"\u003e\r\n\u003cdiv class=\"product-recommendations cc-animate-init -in cc-animate-complete\" data-section-id=\"template--16755749650679__recommendations\" data-url=\"\/recommendations\/products?section_id=template--16755749650679__recommendations\u0026amp;limit=5\u0026amp;product_id=7959759880439\" data-components=\"accordion,modal\" data-cc-animate=\"\"\u003e\r\n\u003cdiv class=\"container container--no-max fully-spaced-row\"\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"BFI","offers":[{"title":"Default Title","offer_id":49299505938606,"sku":"EBFI77-K7-SB2","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/motormount-2_8d13dafa-8c8c-4765_1__1.jpg?v=1790056363"},{"product_id":"bfi-motor-mount-spacer-kit-bfi-v2-mounts-manual-transmission","title":"BFI MK7\/8 - Mount Spacer Kit - Manual","description":"\u003cdiv id=\"shopify-section-template--16755749650679__main\" class=\"shopify-section section-main-product page-section-spacing page-section-spacing--no-top-mobile\"\u003e\r\n\u003cdiv data-section-type=\"main-product\" data-components=\"accordion,custom-select,modal\"\u003e\r\n\u003cdiv class=\"product-detail quickbuy-content spaced-row container variant-status--on-sale variant-status--backorder\"\u003e\r\n\u003cdiv class=\"detail product-column-right cc-animate-init -in cc-animate-complete\" data-cc-animate=\"\" data-cc-animate-delay=\"0.2s\"\u003e\r\n\u003cdiv class=\"product-form theme-init\" data-ajax-add-to-cart=\"true\" data-product-id=\"7959759880439\" data-enable-history-state=\"true\"\u003e\r\n\u003cdiv class=\"not-in-quickbuy\"\u003e\r\n\u003cdiv class=\"product-description rte cf\"\u003e\r\n\u003cp\u003eTired of smashing those expensive oil pans on your MK7\/MK8 Golf or Jetta? Looking to gain a bit of extra clearance, but don't want to raise your car up?\u003cbr\u003e\u003cbr\u003eThese engine mount spacers are the perfect option as they are a quick and simple install that give you an additional 17mm of clearance. Sold as a kit of 1 spacer plate, 1 replacement transmission mount boss, and 2 dogbone sleeves. These spacers install between your engine mounts and your engine mount brackets and are fastened with the included longer, and most importantly, upgraded 10.9 hardware. Additionally, these spacers are fully clear anodized for corrosion resistance and long lasting durability. Our spacers will last a lifetime.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBillet Construction\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eUnlike your factory transmission boss (console) which is cast, this engine mount spacer kit comes with a billet machined console, made from 6061-T6. Our billet lift spacers are many times stronger than their factory counterpart. Regardless of the situation, you can drive with the knowledge that these parts are strong enough to take whatever you throw at them.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHeli-Coil\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you have ever had the misfortune of taking your engine mounts on and off multiple times, you'll know that the factory aluminum threads aren't up to the task of repeated removal and torqueing. Over time, these formed aluminum threads weaken and often start to pull, damaging the threaded hole, or increasing the ease of a cross-thread install. To address this issue, we designed our lift spacers to include Heli-Coil stainless steel thread inserts, making the thread connection stronger and repeatedly removeable if necessary.\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\u003cbr\u003e- One 17mm spacer plate \u003cbr\u003e- One replacement Transmission Boss \u003cbr\u003e- Two 17mm dogbone spacer sleeves\u003cbr\u003e- Upgraded 10.9 hardness hardware \u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUpgraded motor mounts are highly recommended when uses these spacers.\u003c\/li\u003e\r\n\u003cli\u003eIn most applications the hood will close without modification but in some instances hood liner will need to be trimmed.\u003c\/li\u003e\r\n\u003cli\u003eVehicles that are significantly lower than stock may experience the axles hitting the frame when using these spacers. Frame notch may be required.\u003c\/li\u003e\r\n\u003cli\u003eWhile these spacers will work with all factory and aftermarket engine and transmission mounts, we cannot guarantee the correct length of hardware for all non-BFI aftermarket mounts.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFITMENT:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi 8V A3\/S3\u003c\/li\u003e\r\n\u003cli\u003eAudi TT\/TTS MK3\u003c\/li\u003e\r\n\u003cli\u003eVW MK7 GTI\/Golf R\u003c\/li\u003e\r\n\u003cli\u003eVW MK7.5 GTI\/Golf R (Manual only) \u003c\/li\u003e\r\n\u003cli\u003eVW MK7 Alltrack\u003c\/li\u003e\r\n\u003cli\u003eVW MK7 Jetta\u003c\/li\u003e\r\n\u003cli\u003eVW Tiguan (Manual AWD only - DQ250) \u003c\/li\u003e\r\n\u003cli\u003eVW MK8 GTI (Manual)\u003c\/li\u003e\r\n\u003cli\u003eVW MK8 Golf R (Manual)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv id=\"shopify-section-template--16755749650679__recommendations\" class=\"shopify-section section-product-recommendations\"\u003e\r\n\u003cdiv class=\"product-recommendations cc-animate-init -in cc-animate-complete\" data-section-id=\"template--16755749650679__recommendations\" data-url=\"\/recommendations\/products?section_id=template--16755749650679__recommendations\u0026amp;limit=5\u0026amp;product_id=7959759880439\" data-components=\"accordion,modal\" data-cc-animate=\"\"\u003e\r\n\u003cdiv class=\"container container--no-max fully-spaced-row\"\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"BFI","offers":[{"title":"Default Title","offer_id":49299505905838,"sku":"EBFI77-K7-SB1","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/motormount_32c713b2-0152-41dd-b5_2.jpg?v=1790056363"},{"product_id":"bfi-mk5-6-pq35-motor-mount-spacer-kit-bfi-v2-mounts-with-dsg-transmission","title":"BFI MK7\/8 - Mount Spacer Kit - BFI Mounts - DSG\/Automatic","description":"\u003cdiv id=\"shopify-section-template--16755749650679__main\" class=\"shopify-section section-main-product page-section-spacing page-section-spacing--no-top-mobile\"\u003e\r\n\u003cdiv data-section-type=\"main-product\" data-components=\"accordion,custom-select,modal\"\u003e\r\n\u003cdiv class=\"product-detail quickbuy-content spaced-row container variant-status--backorder\"\u003e\r\n\u003cdiv class=\"detail product-column-right cc-animate-init -in cc-animate-complete\" data-cc-animate=\"\" data-cc-animate-delay=\"0.2s\"\u003e\r\n\u003cdiv class=\"product-form theme-init\" data-ajax-add-to-cart=\"true\" data-product-id=\"7959740842231\" data-enable-history-state=\"true\"\u003e\r\n\u003cdiv class=\"not-in-quickbuy\"\u003e\r\n\u003cdiv class=\"product-description rte cf\"\u003e\r\n\u003cp\u003eTired of smashing those expensive oil pans on your MK5\/MK6 Golf or Jetta? Looking to gain a bit of extra clearance, but don't want to raise your car up?\u003cbr\u003e\u003cbr\u003eThese engine mount spacers are the perfect option as they are a quick and simple install that give you an additional 17mm of clearance. Sold as a kit of 1 spacer plate, 1 replacement transmission mount boss, and 2 dogbone sleeves. These spacers install between your engine mounts and your engine mount brackets and are fastened with the included longer, and most importantly, upgraded 10.9 hardware. Additionally, these spacers are fully clear anodized for corrosion resistance and long lasting durability. Our spacers will last a lifetime.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBillet Construction\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eUnlike your factory transmission boss (console) which is cast, this engine mount spacer kit comes with a billet machined console, made from 6061-T6. Our billet lift spacers are many times stronger than their factory counterpart. Regardless of the situation, you can drive with the knowledge that these parts are strong enough to take whatever you throw at them.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHeli-Coil\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you have ever had the misfortune of taking your engine mounts on and off multiple times, you'll know that the factory aluminum threads aren't up to the task of repeated removal and torqueing. Over time, these formed aluminum threads weaken and often start to pull, damaging the threaded hole, or increasing the ease of a cross-thread install. To address this issue, we designed our lift spacers to include Heli-Coil stainless steel thread inserts, making the thread connection stronger and repeatedly removeable if necessary.\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\u003cbr\u003e- One 17mm spacer plate \u003cbr\u003e- One replacement Transmission Boss \u003cbr\u003e- Two 17mm dogbone spacer sleeves\u003cbr\u003e- Upgraded 10.9 hardness hardware \u003c\/p\u003e\r\n\u003cbr\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUpgraded motor mounts are highly recommended when uses these spacers.\u003c\/li\u003e\r\n\u003cli\u003eIn most applications the hood will close without modification but in some instances hood liner will need to be trimmed.\u003c\/li\u003e\r\n\u003cli\u003eVehicles that are significantly lower than stock may experience the axles hitting the frame when using these spacers. Frame notch may be required.\u003c\/li\u003e\r\n\u003cli\u003eWhile these spacers will work with all factory and aftermarket engine and transmission mounts, we cannot guarantee the correct length of hardware for all non-BFI aftermarket mounts.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFITMENT:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi 8P A3\u003c\/li\u003e\r\n\u003cli\u003eAudi 8J TT (MK2)\u003c\/li\u003e\r\n\u003cli\u003eVW MK5 Jetta\u003c\/li\u003e\r\n\u003cli\u003eVW MK6 Jetta\u003c\/li\u003e\r\n\u003cli\u003eVW MK5 GTI\u003c\/li\u003e\r\n\u003cli\u003eVW MK6 GTI\u003c\/li\u003e\r\n\u003cli\u003eVW EOS\u003c\/li\u003e\r\n\u003cli\u003eVW Beetle (2012-2015)\u003c\/li\u003e\r\n\u003cli\u003eVW Passat B6\u003c\/li\u003e\r\n\u003cli\u003eVW Passat B7\u003c\/li\u003e\r\n\u003cli\u003eVW CC\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv id=\"shopify-section-template--16755749650679__recommendations\" class=\"shopify-section section-product-recommendations\"\u003e\r\n\u003cdiv class=\"product-recommendations cc-animate-init -in cc-animate-complete\" data-section-id=\"template--16755749650679__recommendations\" data-url=\"\/recommendations\/products?section_id=template--16755749650679__recommendations\u0026amp;limit=5\u0026amp;product_id=7959740842231\" data-components=\"accordion,modal\" data-cc-animate=\"\"\u003e\r\n\u003cdiv class=\"container container--no-max fully-spaced-row\"\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"BFI","offers":[{"title":"Default Title","offer_id":49299563872430,"sku":"EBFI77-K5-SB4","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/motormount-2_4000x.progressive_ed41587f-1a9b-4c3e-9572-54143027955d.jpg?v=1790056518"},{"product_id":"bfi-mk5-6-pq35-motor-mount-spacer-kit-factory-mounts-with-manual-transmission","title":"BFI MK5\/6 - Mount Spacer Kit - Stock Mounts - Manual","description":"\u003cdiv id=\"shopify-section-template--16755749650679__main\" class=\"shopify-section section-main-product page-section-spacing page-section-spacing--no-top-mobile\"\u003e\r\n\u003cdiv data-section-type=\"main-product\" data-components=\"accordion,custom-select,modal\"\u003e\r\n\u003cdiv class=\"product-detail quickbuy-content spaced-row container variant-status--backorder\"\u003e\r\n\u003cdiv class=\"detail product-column-right cc-animate-init -in cc-animate-complete\" data-cc-animate=\"\" data-cc-animate-delay=\"0.2s\"\u003e\r\n\u003cdiv class=\"product-form theme-init\" data-ajax-add-to-cart=\"true\" data-product-id=\"7959740842231\" data-enable-history-state=\"true\"\u003e\r\n\u003cdiv class=\"not-in-quickbuy\"\u003e\r\n\u003cdiv class=\"product-description rte cf\"\u003e\r\n\u003cp\u003eTired of smashing those expensive oil pans on your MK5\/MK6 Golf or Jetta? Looking to gain a bit of extra clearance, but don't want to raise your car up?\u003cbr\u003e\u003cbr\u003eThese engine mount spacers are the perfect option as they are a quick and simple install that give you an additional 17mm of clearance. Sold as a kit of 1 spacer plate, 1 replacement transmission mount boss, and 2 dogbone sleeves. These spacers install between your engine mounts and your engine mount brackets and are fastened with the included longer, and most importantly, upgraded 10.9 hardware. Additionally, these spacers are fully clear anodized for corrosion resistance and long lasting durability. Our spacers will last a lifetime.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBillet Construction\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eUnlike your factory transmission boss (console) which is cast, this engine mount spacer kit comes with a billet machined console, made from 6061-T6. Our billet lift spacers are many times stronger than their factory counterpart. Regardless of the situation, you can drive with the knowledge that these parts are strong enough to take whatever you throw at them.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHeli-Coil\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you have ever had the misfortune of taking your engine mounts on and off multiple times, you'll know that the factory aluminum threads aren't up to the task of repeated removal and torqueing. Over time, these formed aluminum threads weaken and often start to pull, damaging the threaded hole, or increasing the ease of a cross-thread install. To address this issue, we designed our lift spacers to include Heli-Coil stainless steel thread inserts, making the thread connection stronger and repeatedly removeable if necessary.\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\u003cbr\u003e- One 17mm spacer plate \u003cbr\u003e- One replacement Transmission Boss \u003cbr\u003e- Two 17mm dogbone spacer sleeves\u003cbr\u003e- Upgraded 10.9 hardness hardware \u003c\/p\u003e\r\n\u003cbr\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUpgraded motor mounts are highly recommended when uses these spacers.\u003c\/li\u003e\r\n\u003cli\u003eIn most applications the hood will close without modification but in some instances hood liner will need to be trimmed.\u003c\/li\u003e\r\n\u003cli\u003eVehicles that are significantly lower than stock may experience the axles hitting the frame when using these spacers. Frame notch may be required.\u003c\/li\u003e\r\n\u003cli\u003eWhile these spacers will work with all factory and aftermarket engine and transmission mounts, we cannot guarantee the correct length of hardware for all non-BFI aftermarket mounts.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFITMENT:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi 8P A3\u003c\/li\u003e\r\n\u003cli\u003eAudi 8J TT (MK2)\u003c\/li\u003e\r\n\u003cli\u003eVW MK5 Jetta\u003c\/li\u003e\r\n\u003cli\u003eVW MK6 Jetta\u003c\/li\u003e\r\n\u003cli\u003eVW MK5 GTI\u003c\/li\u003e\r\n\u003cli\u003eVW MK6 GTI\u003c\/li\u003e\r\n\u003cli\u003eVW EOS\u003c\/li\u003e\r\n\u003cli\u003eVW Beetle (2012-2015)\u003c\/li\u003e\r\n\u003cli\u003eVW Passat B6\u003c\/li\u003e\r\n\u003cli\u003eVW Passat B7\u003c\/li\u003e\r\n\u003cli\u003eVW CC\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv id=\"shopify-section-template--16755749650679__recommendations\" class=\"shopify-section section-product-recommendations\"\u003e\r\n\u003cdiv class=\"product-recommendations cc-animate-init -in cc-animate-complete\" data-section-id=\"template--16755749650679__recommendations\" data-url=\"\/recommendations\/products?section_id=template--16755749650679__recommendations\u0026amp;limit=5\u0026amp;product_id=7959740842231\" data-components=\"accordion,modal\" data-cc-animate=\"\"\u003e\r\n\u003cdiv class=\"container container--no-max fully-spaced-row\"\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"BFI","offers":[{"title":"Default Title","offer_id":49299563839662,"sku":"EBFI77-K5-SB1","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/motormounts_3_4000x.progressive_ad39b8f9-4623-4ef5-ac72-fbf685fbfda6.jpg?v=1790056555"},{"product_id":"bfi-mk5-6-pq35-motor-mount-spacer-kit-bfi-v2-mounts-with-manual-transmission","title":"BFI MK5\/6 - Mount Spacer Kit - BFI Mounts - Manual","description":"\u003cdiv id=\"shopify-section-template--16755749650679__main\" class=\"shopify-section section-main-product page-section-spacing page-section-spacing--no-top-mobile\"\u003e\r\n\u003cdiv data-section-type=\"main-product\" data-components=\"accordion,custom-select,modal\"\u003e\r\n\u003cdiv class=\"product-detail quickbuy-content spaced-row container variant-status--backorder\"\u003e\r\n\u003cdiv class=\"detail product-column-right cc-animate-init -in cc-animate-complete\" data-cc-animate=\"\" data-cc-animate-delay=\"0.2s\"\u003e\r\n\u003cdiv class=\"product-form theme-init\" data-ajax-add-to-cart=\"true\" data-product-id=\"7959740842231\" data-enable-history-state=\"true\"\u003e\r\n\u003cdiv class=\"not-in-quickbuy\"\u003e\r\n\u003cdiv class=\"product-description rte cf\"\u003e\r\n\u003cp\u003eTired of smashing those expensive oil pans on your MK5\/MK6 Golf or Jetta? Looking to gain a bit of extra clearance, but don't want to raise your car up?\u003cbr\u003e\u003cbr\u003eThese engine mount spacers are the perfect option as they are a quick and simple install that give you an additional 17mm of clearance. Sold as a kit of 1 spacer plate, 1 replacement transmission mount boss, and 2 dogbone sleeves. These spacers install between your engine mounts and your engine mount brackets and are fastened with the included longer, and most importantly, upgraded 10.9 hardware. Additionally, these spacers are fully clear anodized for corrosion resistance and long lasting durability. Our spacers will last a lifetime.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBillet Construction\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eUnlike your factory transmission boss (console) which is cast, this engine mount spacer kit comes with a billet machined console, made from 6061-T6. Our billet lift spacers are many times stronger than their factory counterpart. Regardless of the situation, you can drive with the knowledge that these parts are strong enough to take whatever you throw at them.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHeli-Coil\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you have ever had the misfortune of taking your engine mounts on and off multiple times, you'll know that the factory aluminum threads aren't up to the task of repeated removal and torqueing. Over time, these formed aluminum threads weaken and often start to pull, damaging the threaded hole, or increasing the ease of a cross-thread install. To address this issue, we designed our lift spacers to include Heli-Coil stainless steel thread inserts, making the thread connection stronger and repeatedly removeable if necessary.\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\u003cbr\u003e- One 17mm spacer plate \u003cbr\u003e- One replacement Transmission Boss \u003cbr\u003e- Two 17mm dogbone spacer sleeves\u003cbr\u003e- Upgraded 10.9 hardness hardware \u003c\/p\u003e\r\n\u003cbr\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUpgraded motor mounts are highly recommended when uses these spacers.\u003c\/li\u003e\r\n\u003cli\u003eIn most applications the hood will close without modification but in some instances hood liner will need to be trimmed.\u003c\/li\u003e\r\n\u003cli\u003eVehicles that are significantly lower than stock may experience the axles hitting the frame when using these spacers. Frame notch may be required.\u003c\/li\u003e\r\n\u003cli\u003eWhile these spacers will work with all factory and aftermarket engine and transmission mounts, we cannot guarantee the correct length of hardware for all non-BFI aftermarket mounts.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFITMENT:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi 8P A3\u003c\/li\u003e\r\n\u003cli\u003eAudi 8J TT (MK2)\u003c\/li\u003e\r\n\u003cli\u003eVW MK5 Jetta\u003c\/li\u003e\r\n\u003cli\u003eVW MK6 Jetta\u003c\/li\u003e\r\n\u003cli\u003eVW MK5 GTI\u003c\/li\u003e\r\n\u003cli\u003eVW MK6 GTI\u003c\/li\u003e\r\n\u003cli\u003eVW EOS\u003c\/li\u003e\r\n\u003cli\u003eVW Beetle (2012-2015)\u003c\/li\u003e\r\n\u003cli\u003eVW Passat B6\u003c\/li\u003e\r\n\u003cli\u003eVW Passat B7\u003c\/li\u003e\r\n\u003cli\u003eVW CC\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv id=\"shopify-section-template--16755749650679__recommendations\" class=\"shopify-section section-product-recommendations\"\u003e\r\n\u003cdiv class=\"product-recommendations cc-animate-init -in cc-animate-complete\" data-section-id=\"template--16755749650679__recommendations\" data-url=\"\/recommendations\/products?section_id=template--16755749650679__recommendations\u0026amp;limit=5\u0026amp;product_id=7959740842231\" data-components=\"accordion,modal\" data-cc-animate=\"\"\u003e\r\n\u003cdiv class=\"container container--no-max fully-spaced-row\"\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"BFI","offers":[{"title":"Default Title","offer_id":49299563905198,"sku":"EBFI77-K5-SB3","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/motormount_4000x.progressive_6f0ff2a2-db12-4dad-994b-f2983b661ab6.jpg?v=1790056517"},{"product_id":"bfi-mk5-6-pq35-motor-mount-spacer-kit-stock-mounts-with-dsg-transmission","title":"BFI MK5\/6 - Mount Spacer Kit - Stock Mounts - DSG\/Automatic","description":"\u003cdiv id=\"shopify-section-template--16755749650679__main\" class=\"shopify-section section-main-product page-section-spacing page-section-spacing--no-top-mobile\"\u003e\r\n\u003cdiv data-section-type=\"main-product\" data-components=\"accordion,custom-select,modal\"\u003e\r\n\u003cdiv class=\"product-detail quickbuy-content spaced-row container variant-status--backorder\"\u003e\r\n\u003cdiv class=\"detail product-column-right cc-animate-init -in cc-animate-complete\" data-cc-animate=\"\" data-cc-animate-delay=\"0.2s\"\u003e\r\n\u003cdiv class=\"product-form theme-init\" data-ajax-add-to-cart=\"true\" data-product-id=\"7959740842231\" data-enable-history-state=\"true\"\u003e\r\n\u003cdiv class=\"not-in-quickbuy\"\u003e\r\n\u003cdiv class=\"product-description rte cf\"\u003e\r\n\u003cp\u003eTired of smashing those expensive oil pans on your MK5\/MK6 Golf or Jetta? Looking to gain a bit of extra clearance, but don't want to raise your car up?\u003cbr\u003e\u003cbr\u003eThese engine mount spacers are the perfect option as they are a quick and simple install that give you an additional 17mm of clearance. Sold as a kit of 1 spacer plate, 1 replacement transmission mount boss, and 2 dogbone sleeves. These spacers install between your engine mounts and your engine mount brackets and are fastened with the included longer, and most importantly, upgraded 10.9 hardware. Additionally, these spacers are fully clear anodized for corrosion resistance and long lasting durability. Our spacers will last a lifetime.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBillet Construction\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eUnlike your factory transmission boss (console) which is cast, this engine mount spacer kit comes with a billet machined console, made from 6061-T6. Our billet lift spacers are many times stronger than their factory counterpart. Regardless of the situation, you can drive with the knowledge that these parts are strong enough to take whatever you throw at them.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHeli-Coil\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you have ever had the misfortune of taking your engine mounts on and off multiple times, you'll know that the factory aluminum threads aren't up to the task of repeated removal and torqueing. Over time, these formed aluminum threads weaken and often start to pull, damaging the threaded hole, or increasing the ease of a cross-thread install. To address this issue, we designed our lift spacers to include Heli-Coil stainless steel thread inserts, making the thread connection stronger and repeatedly removeable if necessary.\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\u003cbr\u003e- One 17mm spacer plate \u003cbr\u003e- One replacement Transmission Boss \u003cbr\u003e- Two 17mm dogbone spacer sleeves\u003cbr\u003e- Upgraded 10.9 hardness hardware \u003c\/p\u003e\r\n\u003cbr\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUpgraded motor mounts are highly recommended when uses these spacers.\u003c\/li\u003e\r\n\u003cli\u003eIn most applications the hood will close without modification but in some instances hood liner will need to be trimmed.\u003c\/li\u003e\r\n\u003cli\u003eVehicles that are significantly lower than stock may experience the axles hitting the frame when using these spacers. Frame notch may be required.\u003c\/li\u003e\r\n\u003cli\u003eWhile these spacers will work with all factory and aftermarket engine and transmission mounts, we cannot guarantee the correct length of hardware for all non-BFI aftermarket mounts.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFITMENT:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAudi 8P A3\u003c\/li\u003e\r\n\u003cli\u003eAudi 8J TT (MK2)\u003c\/li\u003e\r\n\u003cli\u003eVW MK5 Jetta\u003c\/li\u003e\r\n\u003cli\u003eVW MK6 Jetta\u003c\/li\u003e\r\n\u003cli\u003eVW MK5 GTI\u003c\/li\u003e\r\n\u003cli\u003eVW MK6 GTI\u003c\/li\u003e\r\n\u003cli\u003eVW EOS\u003c\/li\u003e\r\n\u003cli\u003eVW Beetle (2012-2015)\u003c\/li\u003e\r\n\u003cli\u003eVW Passat B6\u003c\/li\u003e\r\n\u003cli\u003eVW Passat B7\u003c\/li\u003e\r\n\u003cli\u003eVW CC\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv id=\"shopify-section-template--16755749650679__recommendations\" class=\"shopify-section section-product-recommendations\"\u003e\r\n\u003cdiv class=\"product-recommendations cc-animate-init -in cc-animate-complete\" data-section-id=\"template--16755749650679__recommendations\" data-url=\"\/recommendations\/products?section_id=template--16755749650679__recommendations\u0026amp;limit=5\u0026amp;product_id=7959740842231\" data-components=\"accordion,modal\" data-cc-animate=\"\"\u003e\r\n\u003cdiv class=\"container container--no-max fully-spaced-row\"\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"BFI","offers":[{"title":"Default Title","offer_id":49299563937966,"sku":"EBFI77-K5-SB2","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/4017\/8862\/files\/motormounts_9_869x.progressive_2184693e-73ab-4d24-a13e-19e11905e929.jpg?v=1790056517"}],"url":"https:\/\/www.shopdap.com\/collections\/engine-mount-spacers.oembed","provider":"ShopDAP","version":"1.0","type":"link"}