Project MK5 Build from

Project MK5 Build from



Project MK5 Episode 1 - We build the bottom end on our 2.0t FSI engine

When building a big turbo vehicle its very important to get the engine ready for the additional power you are getting ready to put down.  In this episode we talk about building the bottom end of our 2.0t FSI engine.  We go over upgrading connecting rods and piston and why this is important for our build.  Check out the video below.


Parts Talked about in this Video

JE 2.0t FSI Piston for VW and Audi

Integrated 2.0t FSI Connecting Rod Set

ARP Main Studs for 2.0t FSI

Calico Coated Main Bearings for 2.0t FSI 

Calico Coated Rod Bearings for 2.0t FSI




Project MK5 Episode 2 - We install the cylinder head and time up our engine



Head Studs for 2.0t

Upgraded Valve Springs for 2.0t FSI

2.0t FSI Supertech Intake Valves

2.0t FSI Supertech Exhaust Valves

2.0t FSI Cam Cradle Hardware



Project MK5 Episode 3 - We Install the Turbo Exhaust Manifold and Intake Manifold

Project Mk5 Episode 4 - Limited Slip Diff and Steel Shift Forks

Project Mk5 Episode 5 - Integrated Engineering Intake Manifold

Project Mk5 Episode 6 - Southbend Clutch and Engine Install

Project Mk5 Episode 7 - Intercooler, Wiring, and Accessory Install