CTS Turbo Crank Pulley Upgrade (187mm) - 3.0T V6
CTS Turbo Crank Pulley Upgrade (180mm) - 3.0T V6
CTS Turbo is proud to release our Crank Pulley Upgrade Kit for 3.0T FSI.
At 187mm, this CTS pulley is larger diameter than stock and made from precision billet T66061 aluminum. It replaces the two piece design of the stock pulley and also reduces the rotational mass of the crank, freeing up horsepower.
The larger diameter pulley will increase the speed at which the supercharger spins and will increase the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: This kit must be used with appropriate "Stage 2" performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air fuel ratios, timing, and boost pressure bleed off.
Most Stage 2+ software tunes for 187mm pulley are compatible with this kit.
Upgraded charge air cooling system is strongly recommened with 187mm pulley.
Click here for installation guide
Made in house at CTS Turbo, in Canada
Precision CNC machined from billet T66061 aluminum.
OEM-spec honing and tolerances
Replacement crank pulley belt
Anodized black for long-lasting OEM looking finish
CTS Turbo Crank Pulley (187mm)
8 x Grade 12.9 bolts
1 x Bando Crankshaft belt (Made in the USA)
Audi 3.0T V6 24V SC
S4 B8/B8.5 (2010-2016)
S5 B8/B8.5 (2010-2016)
SQ5 B8 (2014+)
Q5 B8 (2009+)
A6 C6 (2005.5 - 2011)
A6 C7 (2012+)
A7 C7 (2012+)
|Shipping||Ships Directly from Supplier|
|Vehicle Application Data||